AKL1000
Specification
| Item | Performance characteristics |
|---|---|
| Rated Operating Voltage | 100 to 240 V AC |
| Allowable Operating Voltage Range | 85 to 264 V AC (85 to 110 % of rated operating voltage) |
| Rated Frequency | 50 / 60 Hz |
| Allowable Momentary Power-Off Time | Max. 10 ms |
| Rated Output Voltage | 24 V DC |
| Output Voltage Range | 21.6 V to 26.4 V DC |
| Rated Output Current | 0.2 A (Note) If a current load over the specified level is continuously applied, the unit may break down. When a short circuit is detected, the whole power supply of Data Logger Light will be shut down. |
| Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ |
| Storage Temperature | -25 to +70 ℃ -13 to +158 ℉ |
| Current Consumption | Max. 230 mA (at 100 V AC) |
| Weight (Typ.) | Approx. 200 g (without battery) |
| Data Accumulation: Logged Data: Description | Instantaneous, difference, average, minimum, and maximum values |
| Data Accumulation: Logged Data: Data Format (Valid for the Register System) | 16-bit integers (signed / unsigned), 32-bit integers (signed / unsigned), HEX (4-digit / 8-digit), Real number |
| Data Accumulation: Logged Data: Number of Registrable Files | 16 |
| Data Accumulation: Logged Data: Number of Registrable Devices | 300 points / 1 file (Note) The maximum total number of points for registrable devices is always 300, for either 1 file or 16 files. |
| Data Accumulation: Data Saving: Saved To | Internal memory (SRAM): 1 MB SD / SDHC memory cards: 2 to 32 GB (Note) The internal memory can store data using the backup battery. Please note that data stored in the internal memory may be lost when the battery has been depleted. |
| Data Accumulation: Data Saving: File System | VFAT / FAT / FAT32 |
| Data Accumulation: Data Saving: Saving Format | CSV file type |
| Data Accumulation: Data Saving: Number of Storable Files | 100 |
| Data Accumulation: Trigger: Trigger Type | - Constant cycle (user-selectable from 1 second to 24 hours) - Contact status (rising edge, falling edge, both edges, accumulation ON time, number of accumulation open/close operations, ON status, and OFF status) - Specified time (every minute, every hour, every day, every week, every month, every year, and specified time) - Register (=, >, <, Not =) - Trigger combinations (AND, OR) |
| Data Accumulation: Trigger: Number of Registrable | 128 |
| E-mail Sending Function: Transmission Network | LAN |
| E-mail Sending Function: E-mail Content | Title: Within 16 one-byte or 8 two-byte characters Body: Within 256 one-byte or 128 two-byte characters |
| E-mail Sending Function: Number of Registrable | 64 (with no files attached) |
| Network Function: Communication Protocol | TCP / IP, UDP / IP |
| Network Function: Application Protocol | SMTP (Capable of POP / APOP authentication), FTP (client / server), SNTP, DHCP, DNS |
| Ethernet | Interface: IEEE802.3U, 10BASE-T / 100BASE-TX Connector type: RJ45 Transmission specifications (Transmission speed): 10 Mbps / 100 Mbps Transmission specifications (Transmission method): Base band Transmission specifications (Max. segment length): 100m 328ft Communication cable: UTP (category 5) Functions: Auto-negotiation function, MDI / MDI-X auto-crossover function |
| RS232C | Interface: RS-232C (Not isolated from the internal circuit) Communication form: 1: 1 communication Number of connected units: 1 unit Communication method: Half-duplex Synchronous system: Synchronous communication method Transmission distance: 15m 49 ft Transmission speed: 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps Transmission format (Stop bit): 1-bits / 2-bits Transmission format (Parity): Odd number / Even number / Not available Transmission format (Data length): 7-bits / 8-bits(Note)With MODBUS (RTU) protocol, it works only with 8-bit. Protocol: MEWTOCOL / Modbus RTU |
| RS485 | Interface: RS-485 (Isolated from the internal circuit) Communication form: 1: N communication Number of connected units: 99 units (Note 1)(Note 2) Communication method: Half-duplex Synchronous system: Synchronous communication method Transmission distance: Max. 1200 m 3,937 ft (Note 3) Transmission speed: 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps Transmission format (Stop bit): 1-bits / 2-bits Transmission format (Parity): Odd number / Even number / Not available Transmission format (Data length): 7-bits / 8-bits (Note 4) Protocol: MEWTOCOL / Modbus RTU (Note 1) When using a PC as a slave station, you are recommended to use SI-35 or SI-35USB of LlNEEYE Co., Ltd. as an RS485 interface. (Note 2) When using SI-35,SI-35USB, our Eco-POWER METER or our PLC (which can be connected up to 99 units), up to 99 units can be connected. In case using this system with the other devices, up to 31 units can be connected. (Note 3) The transmission distance is limited by the transmission speed and the number of units connected. When the speed is 38,400 bps or lower, the maximum transmission distance is 1,200 m 3,937 ft, and the number of units is 99. (Note 4) With Modbus RTU protocol, it works only with 8-bit. |
| Support Media | SD / SDHC memory card (Note) Panasonic business-use SD memory card is recommended. |
| Supported Format Standards | SD / SDHC standard conformance (Note) UHS standard SDHC memory cards are not supported. Log data may not be written to the SD memory card if an SD memory card without operational confirmation is used. |
| Memory Capacity | 2 to 32 GB |