Digital Fiber Sensor FX-500 Ver.2

The Industry’s Leading Fiber Amplifier In Sensing Performance, FX-500 Series

Equipped with the new “application-specific integrated circuit” (ASIC) and a maximum 25 μs response time, the FX-500 series is Panasonic’s advanced amplifier featuring high intensity light and bright dual digital display. The wire-saving block setup and optical communication function reduce the adjustment time as well as the footprint on the DIN rail.

Characteristics:

High stability
Flat Display with Wide Viewing Angle
Wire-Saving Setup and Optical Communication
Built-In Logic Functions

Digital Fiber Sensor FX-500 Ver.2

Part number list

Results 6

Models table for series Digital Fiber Sensor FX-500 Ver.2
Part No.	CE Marking Directive Compliance	Supply Voltage	Power Consumption	Output	Output: Output Points	Output: Output Operation	Output: Short-Circuit Protection	Output 1, Output 2: Output Points	Output 1, Output 2	Output 1, Output 2: Output Operation	Output 1, Output 2: Short-Circuit Protection	Response Time	Analog Output	External Input	External Input (Switchable with Output 2)	Possible External Input Function	Sensitivity Setting	Incident Light Intensity Display Range	Timer Function	Timer Function: Timer Period	Emission Amount Setting Function	Interference Prevention Function	Various Settings	Protection	Ambient Temperature	Emitting Element (Modulated)	Material	Cable	Cable Extension	Weight (Typ.)	Accessory	Directive Compliance	Vibration Resistance	Shock Resistance
FX-502	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)					2 points	NPN open-collector transistor - Maximum sink current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (Note 2) (at maximum sink current) (Note 1) 25 mA max. if 5 or more standard types are connected together. (Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	NPN non-contact input - Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC(at 0.5 mA source current) - Input impedance: 10 kOhm approx.	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-501	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)	NPN open-collector transistor - Maximum sink current: 100 mA (Note 1) - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (Note 2) (at maximum sink current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	1 point	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated					H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	-	-	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-505-C2	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output)					2 points	NPN open-collector transistor - Maximum sink current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (Note 2) (at maximum sink current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable	Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ] Response time: 2 ms or less Zero point: Within 4 mA plus or minus 1 % F.S. Span: Within 16 mA plus or minus 5 % F.S. Linearity: Within plus or minus 3 % F.S. Load resistance: 0 to 250 Ohm (Note) If display adjustment was conducted, it is not in this range.	NPN non-contact input - Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC(at 0.5 mA source current) - Input impedance: 10 kOhm approx.	-	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 12 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	0.2 mm² 6-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable. (however, supply voltage 12 V DC or more)	Net weight: 60 g approx. Gross weight: 100 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-505P-C2	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output)					2 points	PNP open-collector transistor - Maximum source current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (Note 2) (at maximum source current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable	Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ] Response time: 2 ms or less Zero point: Within 4 mA plus or minus 1 % F.S. Span: Within 16 mA plus or minus 5 % F.S. Linearity: Within plus or minus 3 % F.S. Load resistance: 0 to 250 Ohm (Note) If display adjustment was conducted, it is not in this range.	PNP non-contact input - Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open - Input impedance: 10 kOhm approx.	-	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 12 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	0.2 mm² 6-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable. (however, supply voltage 12 V DC or more)	Net weight: 60 g approx. Gross weight: 100 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-502P	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)					2 points	PNP open-collector transistor - Maximum source current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (Note 2) (at maximum source current) (Note 1) 25 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	PNP non-contact input - Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open - Input impedance: 10 kOhm approx.	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-501P	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)	PNP open-collector transistor - Maximum source current: 100 mA (Note 1) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (Note 2) (at maximum source current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	1 point	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated					H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	-	-	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each

Models table for series Digital Fiber Sensor FX-500 Ver.2
Part No.	CE Marking Directive Compliance	Supply Voltage	Power Consumption	Output	Output: Output Points	Output: Output Operation	Output: Short-Circuit Protection	Output 1, Output 2: Output Points	Output 1, Output 2	Output 1, Output 2: Output Operation	Output 1, Output 2: Short-Circuit Protection	Response Time	Analog Output	External Input	External Input (Switchable with Output 2)	Possible External Input Function	Sensitivity Setting	Incident Light Intensity Display Range	Timer Function	Timer Function: Timer Period	Emission Amount Setting Function	Interference Prevention Function	Various Settings	Protection	Ambient Temperature	Emitting Element (Modulated)	Material	Cable	Cable Extension	Weight (Typ.)	Accessory	Directive Compliance	Vibration Resistance	Shock Resistance
FX-502	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)					2 points	NPN open-collector transistor - Maximum sink current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (Note 2) (at maximum sink current) (Note 1) 25 mA max. if 5 or more standard types are connected together. (Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	NPN non-contact input - Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC(at 0.5 mA source current) - Input impedance: 10 kOhm approx.	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-501	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)	NPN open-collector transistor - Maximum sink current: 100 mA (Note 1) - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (Note 2) (at maximum sink current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	1 point	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated					H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	-	-	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-505-C2	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output)					2 points	NPN open-collector transistor - Maximum sink current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (Note 2) (at maximum sink current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable	Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ] Response time: 2 ms or less Zero point: Within 4 mA plus or minus 1 % F.S. Span: Within 16 mA plus or minus 5 % F.S. Linearity: Within plus or minus 3 % F.S. Load resistance: 0 to 250 Ohm (Note) If display adjustment was conducted, it is not in this range.	NPN non-contact input - Signal condition High: +8 V to +V DC or Open Low: 0 to +1.2 V DC(at 0.5 mA source current) - Input impedance: 10 kOhm approx.	-	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 12 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	0.2 mm² 6-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable. (however, supply voltage 12 V DC or more)	Net weight: 60 g approx. Gross weight: 100 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-505P-C2	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output)					2 points	PNP open-collector transistor - Maximum source current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (Note 2) (at maximum source current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable	Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ] Response time: 2 ms or less Zero point: Within 4 mA plus or minus 1 % F.S. Span: Within 16 mA plus or minus 5 % F.S. Linearity: Within plus or minus 3 % F.S. Load resistance: 0 to 250 Ohm (Note) If display adjustment was conducted, it is not in this range.	PNP non-contact input - Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open - Input impedance: 10 kOhm approx.	-	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 12 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	0.2 mm² 6-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable. (however, supply voltage 12 V DC or more)	Net weight: 60 g approx. Gross weight: 100 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-502P	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)					2 points	PNP open-collector transistor - Maximum source current: 50 mA (Note 1) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (Note 2) (at maximum source current) (Note 1) 25 mA max. if 5 or more standard types are connected together. (Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated	H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	PNP non-contact input - Signal condition High: +4 V to +V DC (at 3 mA sink current) Low: 0 to +0.6 V DC or Open - Input impedance: 10 kOhm approx.	Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each
FX-501P	EMC Directive, RoHS Directive	12 to 24 V DC+10-15 % Ripple P-P 10 % or less	Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage) ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)	PNP open-collector transistor - Maximum source current: 100 mA (Note 1) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (Note 2) (at maximum source current) (Note 1) 50 mA max. if 5 or more standard types are connected together. (Note 2)50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)	1 point	Switchable either Light-ON or Dark-ON by L/D mode	Incorporated					H-SP: 25 micro s or less FAST: 60 micro s or less STD: 250 micro s or less LONG: 2 ms or less U-LG: 4 ms or less HYPR: 24 ms or less, selectable		-	-	-	2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment	H-SP / FAST / STD: 0 to 4,000 LONG: 0 to 8,000 U-LG / HYPR: 0 to 9,999	Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective	Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx. Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx. Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx. each output is set individually	Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]	Incorporated (Note) , selectable either automatic interference prevention or different frequency (Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units. - Number of sensor heads mountable closely (Unit: set) Response time: IP-1 H-SP: 0 FAST: 2 STD: 4 LONG: 8 U-LG: 8 HYPR: 12	Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.	IP40 (IEC)	-10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉　or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉　] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉	Red LED (Peak emission wavelength: 643 nm 0.025 mil)	Enclosure, Case cover: Polycarbonate Switch: Polyacetal	-	-	Net weight: 15 g approx. Gross weight: 70 g approx.	FX-MB1 (Amplifier protection seal): 1 set	EMC Directive, RoHS Directive, UL/c-UL Listing certification, Korean S mark certification	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours each	98 m/s² acceleration (10 G approx.) in X, Y and Z directions five times each

High Stability

The powerful emitting element of the FX-500 series delivers a precise and stable reading by limiting the light intensity oscillation four times more than the previous series.

Flat Display with Wide Viewing Angle

The large, bright, and high-contrast 7-segment display provides a clear visibility from a wide angle of view.

Wire-Saving Setup and Optical Communication

The FX-500 provides the wire-saving setup, allowing the user to save the space by installing up to 16 amplifiers side-by-side and powering them up via only one power line. The optical communication feature reduces the setting time by transferring the current settings from all connected sensors at once.

Built-In Logic Functions

FX-500 amplifiers can perform AND, OR, and XOR logical operations against their outputs. This feature may reduce calculation on the controller side or even eliminate the need for external controllers, such as PLC, in simple applications.