Upper Communication Unit for Digital Sensors SC-GU1-485
Characteristics:
Up To 16 Digital Fiber Optic, Pressure And Laser Sensors Can Be Remotely Accessed To Monitor Functionality, Change Settings And Externally Teach Or Change Output Set Points
This Unit Can Be Connected Serially To Maximum Of 31 Other Units Increasing The Total Sensors To 512 With Remote Access
This Unit Reduces Cost And Time Of Wiring, Construction And Space
Communication Speed Is 57.6kbps
Upper Communication Unit for Digital Sensors SC-GU1-485
Part number list
Results 1
Models table for series Upper Communication Unit for Digital Sensors SC-GU1-485
FX-501(P), FX-502(P), FX-301(P) (Note) , FX-305(P), LS-403, DPS-401(P), DPS-402(P), SC-T1JA (Note:Applicable units are for the FX-301(P) after version update. Do not use the previous version of FX-301(P). The updated version of FX-301(P) has the ''NAVI'' printed only on single side.)
Max. 16 units of digital sensor / analog input unit per SC-GU1-485(Note:The maximum number of units is 12 for configurations including either the FX-501(P)/502(P) or LS-501(P).)
Max. 31 nodes
24 V DC plus or minus 10 % Ripple P-P 10 % or less
Communication cable: 100 m 328.084 ft or less [SC-GU1-485 (termination) to PLC] Power supply cable: Less than 10 m 32.808 ft
Green LED (Lights up when the power is ON)
Green LED (Lights up during communication)
Red LED [Blinks when communication error between PLC (Programmable Logic Controller) and Master or Master and Slave, or command error occurs]
Red LED (Blinks when communication error between the main unit and sensors occur)
–10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
FX-501(P), FX-502(P), FX-301(P) (Note) , FX-305(P), LS-403, DPS-401(P), DPS-402(P), SC-T1JA (Note:Applicable units are for the FX-301(P) after version update. Do not use the previous version of FX-301(P). The updated version of FX-301(P) has the ''NAVI'' printed only on single side.)
Max. 16 units of digital sensor / analog input unit per SC-GU1-485(Note:The maximum number of units is 12 for configurations including either the FX-501(P)/502(P) or LS-501(P).)
Max. 31 nodes
24 V DC plus or minus 10 % Ripple P-P 10 % or less
Communication cable: 100 m 328.084 ft or less [SC-GU1-485 (termination) to PLC] Power supply cable: Less than 10 m 32.808 ft
Green LED (Lights up when the power is ON)
Green LED (Lights up during communication)
Red LED [Blinks when communication error between PLC (Programmable Logic Controller) and Master or Master and Slave, or command error occurs]
Red LED (Blinks when communication error between the main unit and sensors occur)
–10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are connected in cascade: –10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: –10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed), Storage: –20 to +70 ℃ –4 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each