FX-CH2
Specification
| Item | Performance characteristics |
|---|---|
| Applicable Sensors | FX-301(P) (Note) , FX-305(P) (Note) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P). The updated version of FX-301(P) have ''NAVI'' printed on one side. |
| Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Power Consumption | 600 mW or less (when all indicators light up) |
| Input | Low: 0 to +2 V DC Source current 0.5 mA Input impedance 10 kOhm approx. High: +5 V to +V DC, or open |
| Power Indicator | Green LED (Lights up when the power is ON) |
| Transmission Operation Indicator | Green LED (Lights up when loaded, and 2-level / Limit teaching, blinks to lights up when saved, and Full-auto teaching) |
| Ambient Temperature | -10 to +55 degrees +14 to +131 degrees Fahrenheit (If 4 to 7 sensors are connected in cascade: -10 to +50 degrees +14 to +122 degrees Fahrenheit , if 8 to 16 sensors are connected in cascade: -10 to +45 degrees +14 to +113 degrees Fahrenheit ) (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Material | Enclosure: Heat-resistant ABS |
| Connecting Method | Connector (Note) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below. Main cable (3-core) CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft) |
| Accessory | CN-EP1 (Connector for input device) (Note) : 1 pc. (Note) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be dia. 1.5 mm dia. 0.059 in or less. |
| Weight (Typ.) | Net weight: 20 g approx. Gross weight: 40 g approx. |