FX-CH
Specification
| Item | Performance characteristics |
|---|---|
| Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current Consumption | 25 mA or less (When all indicators light up) |
| Bank Selection Input | Low: 0 to 2 V DC (Source current: 0.5 mA Input impedance: 10 kOhm approx.) High: 5 V to +V DC, or open |
| Power Indicator | Green LED (Lights up when the power is ON) |
| Transmission Operation Indicator | Green LED (Lights up when loaded, blinks to lights up when saved) |
| Ambient Temperature | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Material | Enclosure: Heat-resistant ABS |
| Connecting Method | Connector (Note) The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft) |
| Cable Length | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Weight (Typ.) | Net weight: 20 g approx. Gross weight: 25 g approx. |
| Accessory | SL-CP1 (4-pin type snap male connector): 1 pc. |