Convergent Reflective Micro Photoelectric Sensor PM2

The fixed beam of focused light from the Convergent Reflective Type Micro Photoelectric PM2 Sensor enables it to precisely detect an object within a defined sensing range. With the ability to measure independently of the background, the PM2 Sensors are also able to detect dark or slightly reflective objects as well as extremely thin objects (> 0.05mm). These features, combined with its compact and robust design, make the PM2 Sensor suitable for a large number of applications.

Characteristics:

Response Time Typically 20µs
Detection Independent Of Background
Connector Termination

Convergent Reflective Micro Photoelectric Sensor PM2

Part number list

Results 12

Models table for series Convergent Reflective Micro Photoelectric Sensor PM2
Part No.	CE Marking Directives	Sensing Range	Minimum Sensing Object	Hysteresis	Repeatability (Perpendicular to Sensing Axis)	Supply Voltage	Current Consumption	Output	Output: Over-Current Protection	Output: Utilization Category	Response Time	Operation Indicator	Pollution Degree	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Vibration Resistance	Shock Resistance	Emitting Element	Material	Cable	Cable Length	Weight (Typ.)
PM2-LF10B-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LH10	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4.5 g approx. Gross weight: 85 g approx.(10 piece package)
PM2-LH10-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LL10	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4 g approx. Gross weight: 80 g approx.(10 piece package)
PM2-LL10B	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4 g approx. Gross weight: 80 g approx.(10 piece package)
PM2-LH10B-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LF10B	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4.5 g approx. Gross weight: 85 g approx.(10 piece package)
PM2-LF10-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LF10	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4.5 g approx. Gross weight: 85 g approx.(10 piece package)
PM2-LL10-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)

Models table for series Convergent Reflective Micro Photoelectric Sensor PM2
Part No.	CE Marking Directives	Sensing Range	Minimum Sensing Object	Hysteresis	Repeatability (Perpendicular to Sensing Axis)	Supply Voltage	Current Consumption	Output	Output: Over-Current Protection	Output: Utilization Category	Response Time	Operation Indicator	Pollution Degree	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Vibration Resistance	Shock Resistance	Emitting Element	Material	Cable	Cable Length	Weight (Typ.)
PM2-LF10B-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LH10	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4.5 g approx. Gross weight: 85 g approx.(10 piece package)
PM2-LH10-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LL10	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4 g approx. Gross weight: 80 g approx.(10 piece package)
PM2-LL10B	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4 g approx. Gross weight: 80 g approx.(10 piece package)
PM2-LH10B-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LF10B	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4.5 g approx. Gross weight: 85 g approx.(10 piece package)
PM2-LF10-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)
PM2-LF10	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Terminal part: HSM (Ag plated)	-	Total length up to 2 m 6.562 ft is possible with 0.3 mm², or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)	Net weight: 4.5 g approx. Gross weight: 85 g approx.(10 piece package)
PM2-LL10-C1	EMC Directive, RoHS Directive	2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in) (Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.	ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)	20 % or less of operation distance with white non-glossy paper (15 × 15 mm 0.591 × 0.591 in)	0.08 mm 0.003 in or less (Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.	5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less	Average: 25 mA or less, Peak: 80 mA or less	NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between output and 0 V) Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)	Incorporated	DC-12 or DC-13	0.8 ms or less	Red LED (lights up when the output is ON)	3 (Industrial environment)	–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉	45 to 85 % RH, Storage: 45 to 85 % RH	Incandescent light: 3,500 lx or less at the light-receiving face	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)	Enclosure: Polycarbonate, Fixed cable part: PBT	0.2 mm² 3-core cabtyre cable, 1 m 3.281 ft long (Note) Cable cannot be extended.	-	Net weight: 25 g approx. Gross weight: 330 g approx.(10 piece package)