Item | Performance characteristics |
---|---|
Operation Indicator | Orange LED (lights up when output 1 and output 2 are ON) |
Laser Emission Indicator | Green LED (lights up during laser emission) |
Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ ) (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
Shock Resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
Material | Enclosure: Heat-resistant ABS Transparent cover: Polycarbonate Push button switch: Acrylic Jog switch: ABS |
Cable | - (Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below. Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft), CN-74-C2 (cable length 2 m 6.562 ft), CN-74-C5 (cable length 5 m 16.404 ft) Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft), CN-72-C2 (cable length 2 m 6.562 ft), CN-72-C5 (cable length 5 m 16.404 ft) |
Weight (Typ.) | Net weight: 15 g approx Gross weight: 20 g approx |
Supply Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current Consumption | Normal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage) ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage) |
Outputs (Output 1, Output 2) | PNP open-collector transistor - Maximum source current: 100 mA (Note) - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less [at 100 mA (Note) source current] (Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade. |
Outputs (Output 1, Output 2): Output Operation | Selectable either Light-ON or Dark-ON, with jog switch |
Response Time | 80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch |
Outputs (Output 1, Output 2): Short-Circuit Protection | Incorporated |
External Input (Laser Emission Halt Full-Auto Teaching/Limit Teaching) | - |
Select Indicator | Yellow LED (lights up when either output 1 or output 2 is selected) |
Mode Indicator | RUN: Green LED TEACH, L/D, TIMER, CUST, PRO: Yellow LED |
Digital Display | 4 digit (green) + 4 digit (red) LED display |
Sensitivity Setting | Normal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment Differential mode: 5-level settings |
Fine Sensitivity Adjustment Function | Incorporated |
Timer Function | Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective. |
Timer Function: Time | 1 to 9,999 ms |
Automatic Interference Prevention Function | Incorporated [Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)] |
Cable Extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.