LS-H21-A
Specification
| Item | Performance characteristics |
|---|---|
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Applicable Amplifiers | LS-401(P), LS-401(P)-C2, LS-403 |
| Sensing Range: U-LG Mode | 30 to 1,000 mm 1.181 to 39.370 in |
| Sensing Range: STD Mode | 30 to 250 mm 1.181 to 9.843 in |
| Sensing Range: Fast Mode | 30 to 150 mm 1.181 to 5.906 in |
| Sensing Range: H-SP Mode | 30 to 150 mm 1.181 to 5.906 in |
| Operation Indicator | Orange LED (lights up when the amplifier output is ON) |
| Laser Emission Indicator | Green LED (lights up during laser emission) |
| Spot-Shape Adjuster | Multi-turn adjuster |
| Protection | IP40 (IEC) |
| Ambient Temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in (10 G max.) double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Emitting Element: IEC/JIS/GB Standard Conforming Type | Red semiconductor laser, Class 1 (IEC / JIS / GB) (Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil) |
| Emitting Element: FDA/IEC/JIS Standard Conforming Type | Red semiconductor laser, Class 1 (FDA / IEC / JIS) (Max. output: 1 mW Peak emission wavelength: 655 nm 0.026 mil) (Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50. |
| Material | Enclosure: PBT (Mounting part: PEI) Lens cover: Acrylic |
| Cable | 0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long (Connector for amplifier attached) (Note) Cable cannot be extended. |
| Weight (Typ.) | Net weight: 30 g approx Gross weight: 40 g approx |
| Accessory | Explanation label: 1 set (Labels are written in Japanese and Chinese for compliance with various standards.) |
Stock Check
Important
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.
