Specifications table for model RX-LS200-C5
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing Range 50 to 200 mm 1.969 to 7.874 in with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
Hysteresis10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
RepeatabilityAlong sensing axis: 1 mm 0.039 in or less
Perpendicular to sensing axis: 0.5 mm 0.020 in or less
Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current Consumption40 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output: Utilization Category DC-12 or DC-13
Output: Output Operation Switchable either Light-ON or Dark-ON
Output: Short-Circuit ProtectionIncorporated
Response Time1 ms or less
Operation Indicator Red LED (lights up when the output is ON)
Stability IndicatorGreen LED (lights up under stable light received condition or stable dark condition)
Distance Adjuster2-turn mechanical adjuster
ProtectionIP67 (IEC)
Pollution Degree 3 (Industrial environment)
Ambient Temperature-25 to 60 degrees -13 to 140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to 70 degrees -22 to 158 degrees Fahrenheit
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,500 lx or less at the light-receiving face
EMCEN 60947-5-2
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting ElementInfrared LED (peak emission wavelength: 880 nm 0.035mil, modulated)
MaterialEnclosure: Die-cast zinc alloy
Indicator cover: Polyethersulphone
Lens: Polycarbonate
Cable0.15 mm2 3-core oil, heat and cold resistant cabtyre cable, 5 m 16.404 ft long
Cable ExtensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
AccessoryMS-RX-1 (Sensor mounting bracket): 1 set
Adjusting screwdriver: 1 pc

Stock Check