SH-31G
Specification
| Item | Performance characteristics |
|---|---|
| Applicable Amplifiers | SU-7 series |
| Sensing Range | 100 mm 3.937 in |
| Sensing Object | Min. ø1 mm ø0.039 in opaque object (with 100 mm 3.937 in setting distance and at the optimum sensitivity) Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition. |
| Hysteresis | - |
| Repeatability (Perpendicular to Sensing Axis) | 0.1 mm 0.004 in or less |
| Operation Indicator | Red LED(lights up when the sensing output of the amplifier is ON, incorporated on the emitter of the thru-beam type sensor head) |
| Protection | IP66 (IEC) |
| Ambient Temperature | -25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed) Storage: -30 to +70 ℃ -22 to +158 ℉ |
| Ambient Humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient Illuminance | Incandescent light: 3,500 lx or less at the light-receiving face |
| Vibration Resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting Element | Green LED(modulated) |
| Emitting Element: Peak Emission Wavelength | 570 nm 0.022 mil |
| Material | Enclosure: ABS, Lens: Polycarbonate |
| Cable | 0.089 mm2 single core shielded cable, 3 m 9.843 ft long |
| Cable Extension | Extension up to total 10 m 32.808 ft is possible with an equivalent cable (thru-beam type: both emitter and receiver). |
| Weight (Typ.) | Emitter: 10 g approx. Receiver: 10 g approx. |
| Accessory | - |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
Stock Check
Important
The service is owned, operated, controlled and managed by Panasonic's distributors.
For pricing, delivery and technical questions related to this service, please direct to them.
Panasonic assumes no responsibility for any dealings you may have with distributors.
