Specification

Specifications table for model SH-61R
ItemPerformance characteristics
Applicable AmplifiersSU-7 series
Sensing Range 2.5 m 8.202 ft [5 to 80 mm 0.197 to 3.150 in when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (Conv. point: 25 mm 0.984 in) (Note)]
Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.
Sensing Object Min. ø5 mm ø0.197 in opaque object
[Min. ø1 mm ø0.039 in steel wire when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type (with 25 mm 0.984 in setting distance and at the max. sensitivity)]
Hysteresis-
[15 % or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type.(Note)]
Note : The sensing range and the hysteresis for the chemical resistant type sensor used in the convergent reflective mode is specified for white non-glossy paper (150 x 150 mm 5.906 x 5.906 in) as the object.
Repeatability (Perpendicular to Sensing Axis) 0.1 mm 0.004 in or less
[0.1 mm 0.004 in or less of operation distance when mounted on optional mounting bracket (MS-SH6-2) and used as convergent reflective type. (with 25 mm 0.984 in setting distance and at the optimum sensitivity(Note))]
Note : The optimum sensitivity stands for the sensitivity level when the operation indicator just lights up in the light received condition.
Operation Indicator Orange LED [lights up when the sensing output of the amplifier is ON, incorporated on the emitter]
ProtectionIP67 (IEC)
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 2,000 lx or less at the light-receiving face
Vibration Resistance10 to 55 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting ElementRed LED (modulated)
Emitting Element: Peak Emission Wavelength644 nm 0.025 mil
MaterialEnclosure: Fluorine resin
Cable sheath: Fluorine resin
Cable0.089 mm2 single core shielded cables, 2 m 6.562 ft long
Cable ExtensionExtension up to total 5 m 16.404 ft is possible with an equivalent cable (SH-61R: both emitter and receiver).
Weight (Typ.)Emitter: 15 g approx.
Receiver: 15 g approx.
AccessoryMS-SH6-1 (Sensor head mounting bracket): 2 pcs.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.