The EX-F1 Pipe-Mountable Liquid Level Detection Sensor can not only be easily mounted onto a pipe with just tying bands, but it requires minimal mounting space thanks to its' built-in amplifier and compact size. Positioning can also be easily changed with the release lever even after mounting.
Liquid (Note):Unclear or highly viscous liquid may not be detected stably.
Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.)
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON)
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
35 to 85 % RH, Storage: 35 to 85 % RH
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.)
lncandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Liquid (Note):Unclear or highly viscous liquid may not be detected stably.
Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.)
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON)
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
35 to 85 % RH, Storage: 35 to 85 % RH
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.)
lncandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Liquid (Note):Unclear or highly viscous liquid may not be detected stably.
Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.)
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON)
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
35 to 85 % RH, Storage: 35 to 85 % RH
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.)
lncandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Liquid (Note):Unclear or highly viscous liquid may not be detected stably.
Outer dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe [PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ] (Note:Do not use the sensor with pipes other than the above specified.)
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
30 mA or less (Note:Unclear or highly viscous liquid may not be detected stably.)
NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Switchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON)
Incorporated
2 ms or less
Red LED (lights up when the output is ON)
35 to 85 % RH, Storage: 35 to 85 % RH
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ (Note:Liquid being detected should also be kept within the rated ambient temperature range.)
lncandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each