Specification

Specifications table for model PX-23ES
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing Range (Out 1 and Out 2 Areas) 1 m 3.281 ft
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
Hysteresis15 % or less of operation distance
(Note:The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
Supply Voltage 10 to 31 V DC including ripple
Power ConsumptionUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note:Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
OUT1, OUT2NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
OUT1, OUT2: Output Operation Selectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)
OUT1, OUT2: Short-Circuit Protection Incorporated
Response Time80 ms or less
Operation Indicators: Out 1 Area Red LED (lights up when the beam is received in the effective OUT 1 areas)
Operation Indicators: Out 2 AreaYellow LED (lights up when the beam is received in the effective OUT 2 areas)
Sensitivity AdjusterContinuously variable adjusters (OUT 1, adjacent right OUT 1, adjacent left OUT 1 and OUT 2 areas are adjusted independently.)
Sensing AreaFour sensing areas are selectable with dip switches.
Sleep FunctionOperating / sleep selectable with external input
Automatic Interference Prevention FunctionOptical interference from up to 25 units is prevented.
ProtectionIP65 (IEC)
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient Humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient IlluminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation Resistance20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting ElementInfrared LED (Peak emission wavelength: 950 nm 0.037 mil, modulated)
MaterialEnclosure: ABS, Lens: Acrylic, Cover: Polycarbonate
CableFor input and output: 0.18 mm2 9-core (PX-24ES and PX-23ES: 12-core) cabtyre cable, 0.5 m 1.640 ft long
For auxiliary sensor connection: 0.18 mm2 10-core connector attached cabtyre cable, 0.5 m 1.640 ft long
Cable ExtensionExtension up to total 100 m 328.084 ft (10 m 32.808 ft for auxiliary sensor connection) is possible with 0.3 mm2, or more, cable.
Weight (Typ.)Net weight: 210 g approx.
Gross weight: 390 g approx.
AccessoryMS-PX-2 (Main sensor mounting bracket): 1 set, Adjusting screwdriver: 1 pc., Matrix chart for sensing areas and external inputs: 1 sheet

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.