Digital Mark Sensor LX-100

The LX-100 Series - a combined LED contrast and color Sensor - can be used both as a high-speed contrast sensor to quickly and reliably detect printer's marks, for example, and as a high-precision color Sensor.

In contrast sensing mode, the Sensor automatically selects the optimum emitting LED during teach-in (static or dynamic teach-in method) from the transmitting light source (red, green and blue LEDs). With a response time of just 45µs, this Sensor is perfect for high processing speeds like those required in printing presses, for example. In color mode, an integrated microprocessor with a 12-bit A/D converter digitally processes the signals of the color to be detected in red, green and blue primary color components. This ensures that even the most minute color differences or merest of tints can be accurately distinguished.

Characteristics

Three Different Emitting LEDs (Red, Green, Blue)
High Precision Coaxial Reflective Optical System
High Resolution 12-Bit A/D Converter
4-Digit Digital Display
Teach-In For Simple Settings (External Teaching Also Possible)
Timer Function (ON/OFF-Delay)
Two Inverse Outputs (Cable Type)
Compact Size
M12 Or Cable Type
IP67

Models table for series Digital Mark Sensor LX-100
Part No.	CE Marking Directive Compliance	Sensing Range	Spot Size	Supply Voltage	Current Consumption	Output 1 (OUT)	Output 1: Short-Circuit Protection	Output 1: Output Operation	Output 2 (OUT)	Output 2: Short-Circuit Protection	Output 2: Output Operation	Response Time	Teaching Input	Digital Display	Sensitivity Setting	Fine Sensitivity Adjustment Function	Timer Function	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Voltage Withstandability	Vibration Resistance	Shock Resistance	Emitting Element	Material	Cable	Cable Extension	Weight (Typ.)	Accessory
LX-101-P-Z	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA source current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	-	-	-	Mark mode: 45 micro s or less Color mode: 150 micro s or less	PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 55 g approx. Gross weight: 120 g approx.	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
LX-101-Z	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	-	-	-	Mark mode: 45 micro s or less Color mode: 150 micro s or less	NPN non-contact input - Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less) - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 55 g approx. Gross weight: 120 g approx.	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
LX-101	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current)	Incorporated	Inverted operation of the output 1	Mark mode: 45 micro s or less Color mode: 150 micro s or less	NPN non-contact input - Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less) - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	0.34 mm² 5-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 120 g approx Gross weight: 180 g approx	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
LX-101-P	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current)	Incorporated	Inverted operation of the output 1	Mark mode: 45 micro s or less Color mode: 150 micro s or less	PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	0.34 mm² 5-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 120 g approx Gross weight: 180 g approx	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.

Models table for series Digital Mark Sensor LX-100
Part No.	CE Marking Directive Compliance	Sensing Range	Spot Size	Supply Voltage	Current Consumption	Output 1 (OUT)	Output 1: Short-Circuit Protection	Output 1: Output Operation	Output 2 (OUT)	Output 2: Short-Circuit Protection	Output 2: Output Operation	Response Time	Teaching Input	Digital Display	Sensitivity Setting	Fine Sensitivity Adjustment Function	Timer Function	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Voltage Withstandability	Vibration Resistance	Shock Resistance	Emitting Element	Material	Cable	Cable Extension	Weight (Typ.)	Accessory
LX-101-P-Z	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA source current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	-	-	-	Mark mode: 45 micro s or less Color mode: 150 micro s or less	PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 55 g approx. Gross weight: 120 g approx.	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
LX-101-Z	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	-	-	-	Mark mode: 45 micro s or less Color mode: 150 micro s or less	NPN non-contact input - Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less) - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 55 g approx. Gross weight: 120 g approx.	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
LX-101	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current)	Incorporated	Inverted operation of the output 1	Mark mode: 45 micro s or less Color mode: 150 micro s or less	NPN non-contact input - Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less) - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	0.34 mm² 5-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 120 g approx Gross weight: 180 g approx	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.
LX-101-P	EMC Directive, RoHS Directive	10 ± 3 mm 0.394 ± 0.118 in	1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)	12 to 24 V DC ± 10 % Ripple P-P 10 % or less	Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current)	Incorporated	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)	PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 50 mA source current)	Incorporated	Inverted operation of the output 1	Mark mode: 45 micro s or less Color mode: 150 micro s or less	PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx.	4-digit red LED display	Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching	Incorporated	Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)	IP67 (IEC)	-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 lx or less at the light-receiving face	1,000 V AC for one min. between all supply terminals connected together and enclosure	10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directionsthree times each	Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)	Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum	0.34 mm² 5-core cabtyre cable, 2 m 6.562 ft long	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.	Net weight: 120 g approx Gross weight: 180 g approx	M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.

Digital Mark Sensor LX-100

Part Number List