Ultra-minute Photoelectric Sensor EX-Z

At a thickness of 3mm, the EX-Z Series is one of the world's thinnest Photoelectric Sensors with a built-in amplifier which was achieved by utilizing a new Semiconductor packaging technology that does not use wire bonding. The compact design now makes it possible to install the sensors in narrow spaces that, in the past, could fit only a conventional fiber sensor head.

Part Number List

Results 48
Models table for series Ultra-minute Photoelectric Sensor EX-Z
Part No.DatasheetCE Marking Directive ComplianceOutput OperationSensing Range Min. Sensing ObjectRepeatability (Perpendicular to Sensing Axis) Supply Voltage Current ConsumptionOutputOutput: Short-Circuit ProtectionResponse TimeOperation Indicator Stability IndicatorProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting ElementGroundingMaterialCableCable ExtensionWeight (Typ.)AccessoryRemark
EMC Directive, RoHS Directive
Dark-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Light-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Dark-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Dark-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 20 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 20 mA source current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Light-ON
200 mm 7.874 in
ø0.5 mm ø0.02 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 200 mm 7.874 in)
0.03 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Light-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 20 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 20 mA source current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Dark-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Dark-ON
200 mm 7.874 in
ø0.5 mm ø0.02 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 200 mm 7.874 in)
0.03 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 20 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 20 mA source current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Dark-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.
EMC Directive, RoHS Directive
Light-ON
50 mm 1.969 in
ø0.3 mm ø0.012 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm 1.969 in)
0.02 mm 0.001 in or less
12 to 24 V DC ±10 % Ripple P-P 10 % or less
Emitter: 10 mA or less
Receiver: 10 mA or less
PNP open-collector transistor
- Maximum source current: 20 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 20 mA source current)
Incorporated
0.5 ms or less
Orange LED (Lights up when the sensing output is ON)
Green LED (Lights up under the stable light received condition or the stable dark condition)
IP67 (IEC)
-10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 5,000 â„“x at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Floating
Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.