| | EMC Directive, RoHS Directive | 500 mm 19.685 in | dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects) | - | 0.05 mm 0.002 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 10 mA or less Receiver: 10 mA or less | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) (incorporated on the receiver) | Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver) | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Polycarbonate Enclosure cover: Polycarbonate | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). | Net weight (each emitter and receiver): 20 g approx Gross weight: 50 g approx | Nut: 2 pcs Toothed lock washer: 2 pcs |
| | EMC Directive, RoHS Directive | 50 mm 1.969 in (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use. | 15 % or less of operation distance (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | 0.5 mm 0.020 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 13 mA or less | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) | Green LED (lights up under stable light received condition orstable dark condition) | Continuously variable adjuster | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Acrylic Enclosure cover: Polycarbonate | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | Net weight: 20 g approx Gross weight: 30 g approx | Nut: 1 pc Toothed lock washer: 1 pc |
| | EMC Directive, RoHS Directive | 500 mm 19.685 in | dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects) | - | 0.05 mm 0.002 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 10 mA or less Receiver: 10 mA or less | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) | DC-12 or DC-13 | Dark-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) (incorporated on the receiver) | Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver) | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Polycarbonate Enclosure cover: Polycarbonate | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). | Net weight (each emitter and receiver): 20 g approx Gross weight: 50 g approx | Nut: 2 pcs Toothed lock washer: 2 pcs |
| | EMC Directive, RoHS Directive | 50 mm 1.969 in (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use. | 15 % or less of operation distance (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | 0.5 mm 0.020 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 13 mA or less | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) | Green LED (lights up under stable light received condition orstable dark condition) | Continuously variable adjuster | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Acrylic Enclosure cover: Polycarbonate | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | Net weight: 20 g approx Gross weight: 30 g approx | Nut: 1 pc Toothed lock washer: 1 pc |
| | EMC Directive, RoHS Directive | 500 mm 19.685 in | dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects) | - | 0.05 mm 0.002 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 10 mA or less Receiver: 10 mA or less | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | Dark-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) (incorporated on the receiver) | Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver) | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Polycarbonate Enclosure cover: Polycarbonate | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). | Net weight (each emitter and receiver): 20 g approx Gross weight: 50 g approx | Nut: 2 pcs Toothed lock washer: 2 pcs |
| | EMC Directive, RoHS Directive | 800 mm 31.496 in | dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects) | - | 0.05 mm 0.002 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 10 mA or less Receiver: 10 mA or less | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | Switchable either Light-ON or Dark-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) (incorporated on the receiver) | Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver) | Continuously variable adjuster | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Polycarbonate Enclosure cover: Polycarbonate | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). | Net weight (each emitter and receiver): 20 g approx Gross weight: 50 g approx | Nut: 2 pcs Toothed lock washer: 2 pcs |
| | EMC Directive, RoHS Directive | 50 mm 1.969 in (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use. | 15 % or less of operation distance (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | 0.5 mm 0.020 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 13 mA or less | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | Dark-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) | Green LED (lights up under stable light received condition orstable dark condition) | Continuously variable adjuster | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Acrylic Enclosure cover: Polycarbonate | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | Net weight: 20 g approx Gross weight: 30 g approx | Nut: 1 pc Toothed lock washer: 1 pc |
| | EMC Directive, RoHS Directive | 50 mm 1.969 in (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use. | 15 % or less of operation distance (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | 0.5 mm 0.020 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 13 mA or less | PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) | DC-12 or DC-13 | Dark-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) | Green LED (lights up under stable light received condition orstable dark condition) | Continuously variable adjuster | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Acrylic Enclosure cover: Polycarbonate | 0.1 mm2 3-core cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | Net weight: 20 g approx Gross weight: 30 g approx | Nut: 1 pc Toothed lock washer: 1 pc |
| | EMC Directive, RoHS Directive | 50 mm 1.969 in (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | Opaque, translucent or transparent object (Note) Make sure to confirm detection with an actual sensor before use. | 15 % or less of operation distance (Note) The sensing range and the hysteresis are specified for white non-glossy paper (100 x 100 mm 3.937 x 3.937 in) as the object. | 0.5 mm 0.020 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | 13 mA or less | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | Dark-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) | Green LED (lights up under stable light received condition orstable dark condition) | Continuously variable adjuster | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Acrylic Enclosure cover: Polycarbonate | 0.1 mm2 3-core cabtyre cable, 5 m 16.404 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable. | | Nut: 1 pc Toothed lock washer: 1 pc |
| | EMC Directive, RoHS Directive | 500 mm 19.685 in | dia. 2 mm dia. 0.079 in or more opaque object (Completely beam interrupted objects) | - | 0.05 mm 0.002 in or less | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less | Emitter: 10 mA or less Receiver: 10 mA or less | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) | DC-12 or DC-13 | Light-ON | Incorporated | 0.5 ms or less | Orange LED (lights up when the output is ON) (incorporated on the receiver) | Green LED (lights up under stable light received condition orstable dark condition, incorporated on the receiver) | - | 3 (Industrial environment) | IP67 (IEC) | -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit | 35 to 85 % RH, Storage: 35 to 85 % RH | Incandescent light: 3,000 lx or less at the light-receiving face | 1,000 V AC for one min. between all supply terminals connected together and enclosure | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | Red LED (modulated) | Enclosure: Die-cast zinc (Nickel plated) Lens: Polycarbonate Enclosure cover: Polycarbonate | 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). | Net weight (each emitter and receiver): 20 g approx Gross weight: 50 g approx | Nut: 2 pcs Toothed lock washer: 2 pcs |