Convergent Reflective Photoelectric Sensor EX-40

The Convergent Reflective Photoelectric Sensor EX-40 offers reliable object detection in a limited area.  Due to convergent distance sensing, the color or material of the object has almost no effect. Further, the background also has very little effect, enabling stable sensing.

Part Number List

Results 8
Models table for series Convergent Reflective Photoelectric Sensor EX-40
Part No.DatasheetCE Marking Directive ComplianceSensing Range Min. Sensing ObjectHysteresisRepeatability (Perpendicular to Sensing Axis) Supply Voltage Current ConsumptionOutputOutput: Utilization Category Output: Output Operation Output: Short-Circuit ProtectionResponse TimeOperation Indicator Stability IndicatorSensitivity AdjusterTimer Function Pollution Degree ProtectionAmbient TemperatureAmbient HumidityAmbient IlluminanceVoltage WithstandabilityInsulation Resistance Vibration ResistanceShock ResistanceEmitting ElementMaterialCableCable ExtensionWeight (Typ.)Accessory
EMC Directive, RoHS Directive
5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 20 mm 0.787 in)
15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.1 mm 0.004 in or less (Setting distance: 20 mm 0.787 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
(Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
-
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate
(Note) : Old (For production before May 2021) …Polyalylate
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 45 g approx
Gross weight: 70 g approx
-
EMC Directive, RoHS Directive
20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in)
10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
(Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
Continuously variable adjuster
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate
(Note) : Old (For production before May 2021) …Polyalylate
0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in)
10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
(Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
Continuously variable adjuster
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate
(Note) : Old (For production before May 2021) …Polyalylate
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 45 g approx
Gross weight: 70 g approx
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 40 mm 1.575 in)
15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.2 mm 0.008 in or less (Setting distance: 40 mm 1.575 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
(Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
Continuously variable adjuster
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate
(Note) : Old (For production before May 2021) …Polyalylate
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 45 g approx
Gross weight: 70 g approx
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in)
10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
-
Variable OFF-delay timer (0.1 to 1 sec. approx.)
(Note) The timer is always effective.
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Polyalylate
0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight: 45 g approx
Gross weight: 70 g approx
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
5 to 38 mm 0.197 to 1.496 in (Conv. point: 20 mm 0.787 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 20 mm 0.787 in)
15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.1 mm 0.004 in or less (Setting distance: 20 mm 0.787 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
(Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
-
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate
(Note) : Old (For production before May 2021) …Polyalylate
0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
-
EMC Directive, RoHS Directive
20 to 35 mm 0.787 to 1.378 in (Conv. point: 30 mm 1.181 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.03 mm dia. 0.001 in gold wire (Setting distance: 30 mm 1.181 in)
10 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.05 mm 0.002 in or less (Setting distance: 30 mm 1.181 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
-
Variable OFF-delay timer (0.1 to 1 sec. approx.)
(Note) The timer is always effective.
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Polyalylate
0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Adjusting screwdriver: 1 pc.
EMC Directive, RoHS Directive
10 to 70 mm 0.394 to 2.756 in (Conv. point: 40 mm 1.575 in)
with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
dia. 0.2 mm dia. 0.008 in copper wire (Setting distance: 40 mm 1.575 in)
15 % or less of operation distance with white non-glossy paper (50 x 50 mm 1.969 x 1.969 in)
0.2 mm 0.008 in or less (Setting distance: 40 mm 1.575 in)
12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
35 mA or less
NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage (Note) : 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
(Note) : Old (For production before May 2021) … 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
DC-12 or DC-13
Light-ON
Incorporated
0.5 ms or less
Red LED (lights up when the output is ON)
Green LED (lights up under stable light received condition or stable dark condition)
Continuously variable adjuster
-
3 (Industrial environment)
IP67 (IEC)
-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 3,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Display cover: Polycarbonate
(Note) : Old (For production before May 2021) …Polyalylate
0.2 mm2 3-core cabtyre cable, 5 m 16.404 ft long
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Adjusting screwdriver: 1 pc.