CMOS type Micro Laser Distance Sensor HG-C1000L

Housed in a lightweight but strong die-cast aluminum case, the compact HG-C Series pairs a highly precise CMOS Image Sensor with a newly designed optical system to achieve a more compact form factor while maintaining highly accurate and precise measurements in the order of 1/100 mm (0.0003 In.). The HG-C1000L additionally features IO-Link compatibility, making it possible to monitor, operate, and collect data from the sensor through an IO-Link master.

Characteristics:

Incredibly stable and accurate measurements
Compact and lightweight form factor
IO Link compatibility
High-level self-diagnosis function

Incredibly Stable and Accurate Measurements

Thanks to a precise and specially designed CMOS image sensor, the HG-C can provide reliable and accurate measurements with a repeatability as small as 10 μm

Compact and Lightweight Form Factor

The HG-C incorporates a built-in mirror to reduce the size of the sensor while maintaining high accuracy measurements. The solid, die-cast aluminum body provides excellent environmental resistances, IP67-rated protection, and reduces the impact of both strain and heat on the measurement accuracy.

IO-Link Compatibility

IO-Link technology makes it possible for a host controller to continuously monitor, operate, and collect data from the HG-C1000L via a higher-level fieldbus through an IO-Link master.

High-Level Self-Diagnosis Function

The self-diagnosis function of the HG-C1000L reports both sensor-level data and state information to the host controller through an IO-Link master, reducing data processing workload and facilitating predictive maintenance.

OTHER RECOMMENDED PRODUCTS

Industrial Automation Products

Commonly purchased with the HG-C1000L Laser Sensors

PROGRAMMABLE LOGIC CONTROLLERS

FP0H Series

PROGRAMMABLE HMI DISPLAYS

WH Series

Models table for series CMOS type Micro Laser Distance Sensor HG-C1000L
Part No.	Regulatory Compliance and Certification	Measurement Center Distance	Measuring Range	Repeatability	Linearity	Temperature Characteristics	Light Source	Beam Diameter	Supply Voltage	Current Consumption	Communication Output (C/Q): IO-Link Communication	Communication Output (C/Q): Baud Rate	Communication Output (C/Q): Process Data	Communication Output (C/Q) : Minimum Cycle Time	Control Output	Control Output: Output Operation	Control Output: Short-Circuit Protection	Response Time	Pollution Degree	Operating Altitude	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Vibration Resistance	Shock Resistance	Cable	Cable Extension	Material	Weight (Typ.)	Remark
HG-C1200L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	200 mm 7.874 in	±80 mm 3.150 in	200 μm 7.874 mil	±0.2 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø300 μm 11.811 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1030L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	30 mm 1.181 in	±5 mm 0.197 in	10 μm 0.394 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø50 μm 1.969 mil approx	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1200L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	200 mm 7.874 in	±80 mm 3.150 in	200 μm 7.874 mil	±0.2 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø300 μm 11.811 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1050L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	50 mm 1.969 in	±15 mm 0.591 in	30 μm 1.181 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø70 μm 2.756 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1100L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	100 mm 3.937 in	±35 mm 1.328 in	70 μm 2.756 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø120 μm 4.724 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1100L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	100 mm 3.937 in	±35 mm 1.328 in	70 μm 2.756 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø120 μm 4.724 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1400L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	400 mm 15.748 in	±200 mm 7.874 in	300 μm 11.811 mil (Measuring distance 200 to 400 mm 7.874 to 15.748 in) 800 μm 31.496 mil (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	±0.2 % F.S. (Measuring distance 200 to 400 mm 7.874 to 15.748 in) ±0.3 % F.S. (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø500 μm 19.685 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1050L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	50 mm 1.969 in	±15 mm 0.591 in	30 μm 1.181 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø70 μm 2.756 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1030L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	30 mm 1.181 in	±5 mm 0.197 in	10 μm 0.394 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø50 μm 1.969 mil approx	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1400L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	400 mm 15.748 in	±200 mm 7.874 in	300 μm 11.811 mil (Measuring distance 200 to 400 mm 7.874 to 15.748 in) 800 μm 31.496 mil (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	±0.2 % F.S. (Measuring distance 200 to 400 mm 7.874 to 15.748 in) ±0.3 % F.S. (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø500 μm 19.685 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.

Models table for series CMOS type Micro Laser Distance Sensor HG-C1000L
Part No.	Regulatory Compliance and Certification	Measurement Center Distance	Measuring Range	Repeatability	Linearity	Temperature Characteristics	Light Source	Beam Diameter	Supply Voltage	Current Consumption	Communication Output (C/Q): IO-Link Communication	Communication Output (C/Q): Baud Rate	Communication Output (C/Q): Process Data	Communication Output (C/Q) : Minimum Cycle Time	Control Output	Control Output: Output Operation	Control Output: Short-Circuit Protection	Response Time	Pollution Degree	Operating Altitude	Protection	Ambient Temperature	Ambient Humidity	Ambient Illuminance	Vibration Resistance	Shock Resistance	Cable	Cable Extension	Material	Weight (Typ.)	Remark
HG-C1200L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	200 mm 7.874 in	±80 mm 3.150 in	200 μm 7.874 mil	±0.2 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø300 μm 11.811 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1030L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	30 mm 1.181 in	±5 mm 0.197 in	10 μm 0.394 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø50 μm 1.969 mil approx	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1200L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	200 mm 7.874 in	±80 mm 3.150 in	200 μm 7.874 mil	±0.2 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø300 μm 11.811 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1050L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	50 mm 1.969 in	±15 mm 0.591 in	30 μm 1.181 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø70 μm 2.756 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1100L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	100 mm 3.937 in	±35 mm 1.328 in	70 μm 2.756 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø120 μm 4.724 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1100L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	100 mm 3.937 in	±35 mm 1.328 in	70 μm 2.756 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø120 μm 4.724 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1400L3-P	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	400 mm 15.748 in	±200 mm 7.874 in	300 μm 11.811 mil (Measuring distance 200 to 400 mm 7.874 to 15.748 in) 800 μm 31.496 mil (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	±0.2 % F.S. (Measuring distance 200 to 400 mm 7.874 to 15.748 in) ±0.3 % F.S. (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø500 μm 19.685 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 80 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1050L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	50 mm 1.969 in	±15 mm 0.591 in	30 μm 1.181 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø70 μm 2.756 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1030L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	30 mm 1.181 in	±5 mm 0.197 in	10 μm 0.394 mil	±0.1 % F.S.	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø50 μm 1.969 mil approx	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.
HG-C1400L3-P-J	CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification	400 mm 15.748 in	±200 mm 7.874 in	300 μm 11.811 mil (Measuring distance 200 to 400 mm 7.874 to 15.748 in) 800 μm 31.496 mil (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	±0.2 % F.S. (Measuring distance 200 to 400 mm 7.874 to 15.748 in) ±0.3 % F.S. (Measuring distance 400 to 600 mm 15.748 to 23.622 in)	0.03%F.S./℃	Red semiconductor laser Class 2 [IEC / JIS / GB / FDA (Note)] Max. output: 1 mW, emission peak wavelength: 655 nm 0.026 mil (Note:)This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by the FDA (Food and Drug Administration).	ø500 μm 19.685 mil approx.	24 V DC ±10 % Ripple P-P 10 %	40 mA or less (at 24 V DC supply voltage)	IO-Link Specification V1.1	COM3 (230.4 kbps)	4 byte	1.0 ms	PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (Between control output to +V) • Residual voltage: 1.5 V or less (at 50 mA source current) • Leakage current: 0.1 mA or less	Switchable between either Light-ON or Dark-ON	Incorporated (auto reset type)	Switchable between 1.5 ms / 5 ms / 10 ms	2	2,000 m 6561.680 ft or less	IP67(IEC)	-10 to +45℃ -14 to 113℉ (No dew condensation or icing allowed), Storage: -20 to +60℃ -4 to 140℉	35 to 85 % RH, Storage: 35 to 85 % RH	Incandescent light: 3,000 ℓx or less at the light-receiving face	10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each	500 m/s² acceleration (50 G approx.) in X, Y and Z directions three times each	Discrete wire type: 0.2 mm² 4-core PVC cable, 2 m 6.562 ft long M12 connector type: 0.2 mm² 4-core PVC cable with connector, 0.3 m 0.984 ft long	Extension up to total 20 m 65.617 ft is possible with 0.3 mm², or more, cable.	Enclosure: Aluminum die-cast, Front cover: Acrylic	30 g approx. (without cable), 50 g approx. (including cable)	(Note):Supply voltage: 24 V DC, ambient temperature: +20℃ +68℉, response time: 10 ms, and analog output value of measurement center distance are used for unspecified measurement conditions. The subject is white ceramics.