| | Yb fiber laser; λ= 1,064 nm 0.0419 mil Class4 laser | 20W | 17 W (±5 %) Pulse oscillation
(Note)This indicates the output power at processing point when maximum power is set. (Factory default) | Red semiconductor laser; λ= 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less | Galvano scanning method | 90 mm × 90 mm 3.543 in × 3.543 in | 190 mm 7.480 in
(Note)There may be an individual difference of approximately ±0.5 mm ±0.02 in in the work distance. | Maximum 12,000 mm/sec. 472.441 in/sec.
(Note1)The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material.
(Note2)Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases. | Maximum 240 m/min. 787.402 ft/min.
(Note)Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases. | English uppercase letters, English lowercase letters, numerals, katakana, hiragana,
kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50), True type | Code39, Code128 (GS1-128), ITF, NW-7, EAN/UPC/JAN
GS1 DataBar Limited, GS1 DataBar Stacked,
GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A | QR Code, Micro QR Code, iQR Code, Data Matrix, GS1 Data Matrix, PDF417 | VEC, DXF, HPGL, BMP, JPEG, AI, EPS
(Note)VEC is a figure file format designed exclusively for laser markers. If figure files in the AI or EPS format are used, they must be converted to VEC-format files in advance using the ExportVEC software provided with the product. | I/O terminal block (40 pins), I/O connector (40 pins) | EIA-RS-232C, Ethernet | Head: Naturally air cooling, Controller: Forced air cooling | 180-264 V AC (including power voltage fluctuation of ±10 %), 50/60 Hz
(Note)Frequency is selected and set automatically. | 370 VA or less (2.1 A or less)
(Note)The rush current (typical value) at startup is as follows: 220 V AC (current flowing time of 10 ms or less): 50 A | Head: IP64 | 0 to +40 ℃ +32 to +104℉
(Note1)Common to the controller and head. There must be no dew condensation or icing.
(Note2)Laser power setting of 46 or higher: 0 to +36 ℃ +32 to +97 ℉,
Laser power setting of 1 to 45: 0 to 40 ℃ 32 to 104 ℉ | -10 to +60 ℃ +14 to +140
(Note)Common to the controller and head. There must be no dew condensation or icing. | 35 to 85 % RH
(Note)Common to the controller and head. There must be no dew condensation or icing. | 8 kg approx. | 37 kg approx. | FDA regulations, GB standard, KC mark | Laser Marker Smart Utility (Laser Marker NAVI Smart, logo data editing software, ExportVec, font maker software) | Japanese, English, Chinese (simplified Chinese character), German | Windows® 10 Pro (32 bit, 64 bit), Windows® 8 Pro (32 bit, 64 bit),Windows® 7 Professional SP1 (32 bit, 64 bit)
(Note) Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. |
