LP-ABR11
Specification
| Item | Performance characteristics |
|---|---|
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Image Sensor | 1/3 inches CMOS monochrome |
| Effective Pixels | 1,280 × 960 (1.2 million pixels approx.) |
| Internal Illumination Source | White LED |
| Reading Angle | PITCH : ±35°, SKEW : ±35°, TILT : 360° |
| Supply Voltage | 24 V DC ±10 % |
| Power Consumption | Command (SYNC) standby : 140 mA approx.,
During reading operation : 400 mA approx. |
| Interface: Ethernet | 10Base-T, 100Base-T, 1000Base-T |
| Interface: RS-232C | 1,200 bps to 115.2 kbps |
| Digital Input | Photo-coupler isolation × 1 (Input resistance : 1 kΩ, OFF voltage : 0 to 0.8 V, ON voltage : 6 to 28 V) |
| Digital Output | Photo-coupler isolation × 4 (Maximum rating : 30 V DC, 50 mA) |
| Protection | IP65(IEC) |
| Ambient Temperature | 0 to +40 ℃ +32 to +104 ℉, Storage : -20 to +65 ℃ -4 to +149 ℉ |
| Ambient Humidity | 35 to 85 % RH (No dew condensation allowed),
Storage : 35 to 85 % RH (No dew condensation allowed) |
| Vibration Resistance | 10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each |
| Weight (Typ.) | Net weight : 200 g approx. |
| Supported Symbols (2D) | Data Matrix (ECC200), QR Code |
| Minimum Resolution | 0.167 mm 0.007 in |
| Read Center Distance | 100 mm 3.937 in |
| View Area (Horizontal × Vertical) | 54 × 40 mm 2.126 × 1.575 in (at read center distance) |
| G Distance (Typical) | - For cell size of 0.167 mm 0.007 in : 85 to 125 mm 3.346 to 4.921 in - For cell size of 0.25 mm 0.010 in : 70 to 150 mm 2.756 to 5.906 in |