| | Yb fiber laser; λ= 1,064 nm 0.0419 mil Class4 laser | 20 W | 17 W (±5 %) Note : Indicates the output for the following settings: laser power: 100, pulse duration: 4 ns, and pulse cycle: 1.6 μs. (Factory default) | Pulse oscillation | 1 ns, 4 ns, 8 ns, 16 ns, 30 ns, 120 ns, 200 ns (switchable in seven steps) | 0.5 μs to 500 μs Note : The pulse cycle setting range varies depending on the pulse duration. | Red semiconductor laser; λ= 655 nm 0.026 mil, Class 2 laser, Maximum output; 1 mW or less | Galvano scanning method | Shutter (mounted inside the head) | 90 mm × 90 mm 3.543 in × 3.543 in | 190 mm 7.480 in Note : There is an individual difference of approximately ±0.5 mm 0.020 in for every product. | Stationary object, moving object | Maximum 12,000 mm/s 472.441 in/s Note : The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material. Note : Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases. | Maximum 240 m/min 787.402 ft/min Note : The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material. | 10,000 files | 2,000 items/file | Capital and small letter of alphabet, numeric, symbol, user defined characters (up to 50 characters can be set) Japanese characters: Katakana, Hiragana, Kanji (JIS level-1 and level-2) Simplified Chinese characters: GB 2312 level-1 and level-2 | CODE39, CODE93, CODE128 (GS1-128) , ITF, NW-7, EAN/UPC/JAN, GS1 DataBar Limited, GS1 DataBar Stacked, GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A | QR Code, Micro QR Code, iQR Code, Data Matrix, GS1 Data Matrix, PDF417 | VEC, DXF, HPGL, BMP, JPEG, AI, EPS Note : VEC is a figure file format designed exclusively for laser markers. If figure files in the AI or EPS format are used, they must be converted to VEC-format files in advance using the ExportVEC software provided with the product. | TrueType Font on a PC where the Laser Marker NAVI smart is installed Note : Depending on the character type, it may not be possible to use the laser marker. Letters written from right to left (Arabic letters, Hebrew letters, etc.) and letters that use ligature (Indian letters, etc.) cannot be marked using the laser marker. | Point radiation | 0.1 mm to 90 mm 0.004 in to 3.543 in (Set in increments of 0.001 mm 0.0394 mil) Note : The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material. | I/O terminal block (40 pins), I/O connector (40 pins) | EIA-RS-232C, Ethernet, EtherNet/IP (Note), PROFINET (Note) Note : For communication, prepare optional items separately. LP-ANW10: EtherNet/IP, LP-ANW11: PROFINET | Laser Marker NAVI smart, logo data editing software, ExportVec, font maker software | Windows® 10 Pro (32-bit, 64-bit), Windows® 8.1 Pro (32-bit, 64-bit), Windows® 7 Professional SP1 (32-bit, 64-bit) Note : The OS versions for which Microsoft terminated its support are excluded from supported OS. | USB, Ethernet | Japanese, English, Simplified Chinese character, Traditional Chinese character, German, Korean | 10 sec. approx. | 1 sec. approx. | 180 - 264 V AC (including power voltage fluctuation of ±10 %), 50/60 Hz Note : Frequency is selected and set automatically. | 310 VA or less (2.1 A or less) Note : The rush current (typical value) at startup is as follows: 220 V AC (current flowing time of 10 ms or less): 60 A | Head: Naturally air cooling, Controller / oscillator unit: Forced air cooling | 0 to +40 ℃ +32 to +104 ℉ Note : Laser power setting of 46 or higher: 0 to +36 ℃ +32 to +97 ℉, Laser power setting of 1 to 45: 0 to +40℃ +32 to +104 ℉ Note : Common to the controller, head, and oscillator unit. There must be no dew condensation or icing. If there is a temperature difference between the storage place and the operating place, gradually adapt the devices to the ambient temperature to prevent condensation. | -10 to +60 ℃ +14 to +140 ℉ Note : Common to the controller, head, and oscillator unit. There must be no dew condensation or icing. If there is a temperature difference between the storage place and the operating place, gradually adapt the devices to the ambient temperature to prevent condensation. | 35 to 85 % RH Note : Common to the controller, head, and oscillator unit. There must be no dew condensation or icing. If there is a temperature difference between the storage place and the operating place, gradually adapt the devices to the ambient temperature to prevent condensation. | IP64 Note : The oscillator and controller are not designed as protective structures. The protective structure of the head exhibits its performance only when the fiber unit, laser beam emission port protection glass, various cables, and cable connector covers are all properly mounted. | FDA Regulations, GB Standard, KC mark, Machinery Directive (Declaration of Incorporation), EMC Directive, RoHS Directive | 2.0 m ±0.2 m 6.562 ft ±0.656 ft, Minimum bending radius 80 mm 3.15 in | Head : 8.0 kg approx. Oscillator unit : 13 kg approx. Controller : 28 kg approx. |