ER-XC02
Specification
| Item | Performance characteristics |
|---|---|
| CE Marking Compliant Directives | EMC Directive, RoHS Directive |
| Ambient Temperature | 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F |
| Ambient Humidity | 35 to 65 % RH, Storage: 35 to 85 % RH |
| Vibration Resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Shock Resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
| Enclosure Earthing | Floating |
| Material | Enclosure: ABS |
| Weight (Typ.) | Net weight : 130 g approx. |
| Number of Heads Connected | Maximum 2 units |
| Supply Voltage | 24 V DC ±10 % |
| Current Consumption | 450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads |
| Indicator | Displays status of Head 1 and 2 |
| Indicators: Discharge (DSC) | Green LED (lights up when discharging) |
| Indicators: Check | Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected) |
| Indicators: Error (Error) | Red LED (lights up when abnormal discharge is detected) |
| Indicator: Level Meter | Green LED (5 levels, lights up depending on amount of the charge or ion generation) |
| Output [Alarm, Error, COM(Common)] | PhotoMOS relay output • Maximum load current: 100 mA • Applied voltage: 30 V DC or less (between output-output common) • Residual voltage: 1.5 V or less (at load current of 100 mA) |
| Output [Alarm, Error ,COM(Common)]: Output Operation | ALARM: ON when dirt or wear of the discharge needle is detected; OFF when operation is normal. ERROR: OFF when abnormal discharge is detected; ON when operation is normal. |
| Output [Alarm, Error ,COM(Common)]: Short-Circuit Protection | Incorporated (automatic reset type) |
| Discharge Control Input (DSC OFF) | Discharge allowed: Open, Discharge halt: 24 V or 0 V shorted |
| Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation Resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Accessories | Power supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex]) Ground wire (3.7 m 12.139 ft approx.): 1 pc. |