Specification

Specifications table for model SG-D1-2B11
ItemPerformance characteristics
Position
Contact Arrangement1NO/1NC
(11)
Key Removal Position
Applicable StandardsJIS C 8201-5-1, IEC 60947-5-1, EN 60947-5-1, UL 508 (UL listed Certification), CSA 22.2 No.14 (c-UL listed Certification)
Operating Condition: Ambient Temperature -25 to +60℃ -13 to + 140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉
Operating Condition: Ambient Humidity 45 to 85 % RH
Operating Condition: Pollution Degree S3
Operating Condition: Altitude 2,000 m 6,561.68 ft max.
Impulse Withstand Voltage (Uimp)4 kV
Rated Insulation Voltage (Ui)600 V
Thermal Current (Ith)10 A
Rated Operational Voltage (Ue)/Rated Operational Current (Le)
  Ue
24V 48V 50V 110V 220V 440V
Ie AC Resistive load (AC-12) 10A - 10A 10A 6A 2A
Inductive load (AC-15)
(A600)
10A - 7A 5A 3A 1A
DC Resistive load (DC-12) 8A 4A - 2.2A 1.1A -
Inductive load (DC-13)
(P600)
4A 2A - 1.1A 0.6A -
Insulation Resistance100 MΩ min. (500 V DC megger)
Contact Resistance50 mΩ max. (initial value)
Electric Shock Protection ClassClass II(IEC 61140)
ProtectionFront of the panel : IP65
Excess Voltage CategoryII(IEC 60664-1)
Shock ResistanceMalfunction : 100 m/s2, Destruction : 1,000m/s2
Vibration ResistanceMalfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 30 Hz, half amplitude 1.5 mm 0.059 in
B10D100,000
(ISO 13849-1 Annex C Table C.1)
Mechanical Durability100,000 operations min.
Electrical Durability100,000 operations min. (1,200 operations/hour)
MaterialActuator : PA6, Contact block : PA66
Connecting MethodTerminal screw (M3.5 philips & flathead )
Applicable Wire SizeMax.2mm2(Single core ø1.6 ø0.063 max.)
2 wires max.
Tightening Torque of the Terminal Screws1.0 to 1.3 N・m
Tightening Torque of the Locking Ring2.0 N・m
Selector Behavior 2 positions
Minimum Direct Opening Operating Angle 90°
Minimum Direct Opening Torque0.4 N・m
Maximum Operation Angle90°
Weight (Typ.)Approx. 75 g
AccessoriesKey : 2pcs., Lever lock : 1 pc.

Stock Check