SW-101
Specification
| Item | Performance characteristics |
|---|---|
| CE Marking Directive Compliance | EMC Directive, RoHS Directive |
| Sensing Method | Thru-beam type photoelectric sensor (2 beam axes) |
| Applicable Standards | CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only) |
| Power Voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current Consumption | 100 mA or less (excluding external connection load) |
| Outputs | Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current) |
| Output: Output Operation | Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF |
| Output: Short-Circuit Protection | Incorporated |
| Response Time | 100 ms or less when an object is detected 50 ms or less when an object is not detected |
| Time-Out Function | Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited) |
| External Input | 0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off) |
| Indicators: Power Indicator | Green LED (lights up when the power is ON) |
| Indicators: Operation Indicator (OPE.) | Green LED (lights up when an object is detected) |
| Indicators: External Input Indicator 1 | Green LED (lights up when external input 1 is valid) |
| Indicators: External Input Indicator 2 | Orange LED (lights up when external input 2 is valid) |
| Indicators: Fault Indicator (Fault) | Yellow LED (blinks or lights up when fault occurs) |
| Environmental Resistance: Degree of Protection | IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part) |
| Ambient Humidity | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Ambient Temperature | -25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
| Ambient Illuminance | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Environmental Resistance: Voltage Withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Vibration Resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each |
| Insulation Resistance | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Shock Resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Removable-Type Terminals: Connector | 3.5 mm 0.138 in pitch, 2-level socket: 12 pins |
| Removable-Type Terminals: Terminal Part | 3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact) |
| Material | Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber |
| Maximum Cable Length | Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm2 ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm2 ) |
| Weight (Typ.) | Net weight: 130 g approx. Gross weight: 200 g approx. |