Specification

Specifications table for model SG-P2020-M-P
ItemPerformance characteristics
Applicable Standards: International StandardISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), IEC 60947-5-3, ISO 14119
Applicable Standards: JapanJIS B 9705-1, JIS C 0508 1 to 7, JIS B 9961, JIS C 8201-5-2, JIS B 9710
Applicable Standards: Europe (EU)EN ISO 13849-1 (Category 4, PLe), EN ISO 14119, EN 60947-5-3, EN 300 330, EN IEC 63000, EN 301 489-1
Directive ComplianceCE Marking (Machinery Directive, RE Directive, RoHS Directive), TÜV SÜD certification, TÜV SÜD NRTL certification (U.S.A., Canada), the U.S.'s radio regulations (FCC), Canada's radio regulations (ICES-003, RSS-310), Singapore's radio regulations (IMDA)
Operating distance : Front / SideSao (OFF→ON): 5 mm 0.197 in, Sar (ON → OFF): 15 mm 0.591 in
Power Voltage 24V DC+10-20% Ripple P-P 10 % or less
Current Consumption30 mA or less
Control Outputs (OSSD 1, OSSD 2)PNP open-collector transistor 2 outputs
• Maximum source current: 100 mA
• Applied voltage: Same as the power supply voltage (PNP output: between control output and 0 V)
• Residual voltage: 2 V or less (source current and sink current: 100 mA) (excluding voltage drop due to cable)
• Leakage current: 0.2 mA or less (including power OFF state)
• Maximum load capacity: 0.47 μF
• Load wiring resistance: 3 Ω or less
Control Outputs (OSSD 1, OSSD 2): Operation Mode• When the actuator is detected (safe state): ON
• When the actuator is not detected (unsafe state or lockout state): OFF
• When the switch body (sub) does not detect actuator (series connection): OFF
Control Output (OSSD): Protection CircuitIncorporated
Response Time• For single unit: ON→OFF 100 ms or less, OFF→ON 100 ms or less
• For multiple units: Time for single unit + 5 ms x (number of connected units - 1)
Check input and outputDedicated communication line between the switch body (standard) and the switch body (sub) (Note)
* It is not for external input and output. (voltage range 0 V to 5 V DC)
(Note) : When using the device as a single unit, connect the check input with the check output.
Number of units connected in series30 units or less (standard 1 unit, sub 29 units)
Pollution Degree 3
Environmental Resistance: Degree of ProtectionIP65(IEC)
Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +65 ℃ -13 to +149 ℉
Ambient Humidity30 to 85 % RH, storage: 30 to 95 % RH
Environmental Resistance: Dielectric Strength Voltage1,000 V AC for one minute between all supply terminals connected together and enclosure
Insulation Resistance20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration Resistance10 to 55Hz, 1 mm double amplitude, 2 hours each in X, Y, and Z directions
Shock Resistance300 m/s2 (approx. 30 G), 3 times each in X, Y, and Z direction
MaterialSwitch body: PBT, PC, SUS (stainless steel), EPDM
Actuator: PBT, PC
Cable6–core cabtyre cable, 5 m 16.404 ft long
Connected cable length• When using only one unit: Maximum cable length of 20 m 65.617 ft between switch body and power supply unit
• When connecting multiple units in series: Maximum total cable length of 100 m 328.084 ft, maximum cable length of 20 m 65.617 ft between two adjacent units
Weight (Typ.)Switch body (standard): 180 g approx., Actuator : 20 g approx.
Gross weight270 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were ambient temperature +23 ℃ +73 ℉.

■Transponder specifications
Operating frequency: 125 kHz
Max. transmitter output: 3.33 μW
Applicable Standards: North AmericaCAN/CSA C22.2 No.14, UL508

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.