Europe: EN 60079-0, EN60079-1, EN 60079-28,
USA: FM Class 3600, ANSI/ISA.12.00.01, ANSI/ISA.12.22.01,
Canada: CAN/CSA E60079-0, CAN/CSA E60079-1,
Russia: TP TC 012/2011, ГOCT P MЭК 60079-0, ГOCT MЭК 60079-1, ГOCT 31610.28/IEC 60079-28,
China: GB 3836.1/2,
Japan: Technical standard conforming to IEC Standard 79
USA: Class I Zone 1 AEx d IIB T6, Europe / Canada / Russia / China / Japan: Ex d IIB T6
Hazardous locations such as Zone 1 or Zone 2 where "II BT6" gases or vapors may be present (Note) : Install the product in a location where it is less likely to suffer mechanical damage.
ISO 13849-1 (Category 4, PLe), EN ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 4 (SIL 3), EN 50178, EN 55011, EN 61000-6-2, EN 61496-1 (Type 4), IEC 61496-1/2 (Type 4), UL 61496-1/2 (Type 4), CAN/CSA-C22.2 No. 14
1,595 mm 62.795 in
20 mm 0.787 in
0.3 to 6 m 0.984 to 19.686 ft
ø30 mm ø1.181 in opaque object
± 2.5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
24 V DC ± 10 % Ripple P-P 10 % or less
Emitter: 130 mA or less Receiver: 125 mA or less
Semiconductor output (PNP output equivalent) 2 outputs - Maximum source current: 200 mA - Applied voltage: Same as supply voltage (between control output and +V) - Residual voltage: 3.0 V or less (at 200 mA source current)
ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) / Incorporated
Incorporated
OFF response: 11 ms or less ON response: 70 ms or less
PNP open-collector transistor - Maximum source current: 60 mA - Applied voltage: Same as supply voltage (between auxiliary output and +V) - Residual voltage: 2.5 V or less (at 60 mA source current)
OFF when control outputs are ON, ON when control outputs are OFF
Incorporated
Top beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the topmost beam channel receives light, lights off when the topmost beam channel is interrupted)
Bottom beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the bottommost beam channel receives light, lights off when the bottom most beam channel is interrupted)
Emission control indicator: Orange LED (lights up in orange during emission halt, lights off during normal operation)
Operation indicator: 2-color (Red / Green) LED (lights up in red when control outputs are OFF, lights up in green when control outputs are ON)
Fault indicator: Yellow LED (lights up or blinks if a fault occurs in the safety light curtain)
Top beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the topmost beam channel receives light, lights off when the topmost beam channel is interrupted)
Bottom beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the bottommost beam channel receives light, lights off when the bottom most beam channel is interrupted)
Stable light indicator : 2-color (Green / Orange) LED (lights up in green when stable light state, lights up in orange when unstable light state, lights off when beam channels are interrupted)
OSSD indicator: 2-color (Red / Green) LED (lights up in red when control outputs are OFF, lights up in green when control outputs are ON)
Fault indicator: Yellow LED (lights up or blinks if a fault occurs in the safety light curtain)
Incorporated
Emission: Vs-2.5 V to Vs (sink current: 5 mA or less) (Note), Emission halt: Open, or 0 to +1.5 V (Note) : Vs is the same value as the voltage of the used power supply to be used.
IP65 (IEC)
-10 to +40 ℃ +14 to +104 ℉ (No dew condensation or icing allowed), Storage: -20 to +55 ℃ -4 to +131 ℉
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 5,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and safety light curtain grounding terminal (Note) It shows the specifications of the built-in safety light curtain.
20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and safety light curtain grounding terminal (Note) It shows the specifications of the built-in safety light curtain.
10 to 55 Hz frequency, 0.35 mm 0.014 in double amplitude in X, Y and Z directions for 20 times each
100 m/s2 acceleration (10 G approx.) with pulse width 16 ms in X, Y and Z directions 1,000 times each
2,000 m 6561 ft or less (800 to 1,100 hPa)
Infrared LED (Peak emission wavelength: 850 nm 0.033 mil)
Europe: EN 60079-0, EN60079-1, EN 60079-28,
USA: FM Class 3600, ANSI/ISA.12.00.01, ANSI/ISA.12.22.01,
Canada: CAN/CSA E60079-0, CAN/CSA E60079-1,
Russia: TP TC 012/2011, ГOCT P MЭК 60079-0, ГOCT MЭК 60079-1, ГOCT 31610.28/IEC 60079-28,
China: GB 3836.1/2,
Japan: Technical standard conforming to IEC Standard 79
USA: Class I Zone 1 AEx d IIB T6, Europe / Canada / Russia / China / Japan: Ex d IIB T6
Hazardous locations such as Zone 1 or Zone 2 where "II BT6" gases or vapors may be present (Note) : Install the product in a location where it is less likely to suffer mechanical damage.
ISO 13849-1 (Category 4, PLe), EN ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 4 (SIL 3), EN 50178, EN 55011, EN 61000-6-2, EN 61496-1 (Type 4), IEC 61496-1/2 (Type 4), UL 61496-1/2 (Type 4), CAN/CSA-C22.2 No. 14
1,595 mm 62.795 in
20 mm 0.787 in
0.3 to 6 m 0.984 to 19.686 ft
ø30 mm ø1.181 in opaque object
± 2.5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
24 V DC ± 10 % Ripple P-P 10 % or less
Emitter: 130 mA or less Receiver: 125 mA or less
Semiconductor output (PNP output equivalent) 2 outputs - Maximum source current: 200 mA - Applied voltage: Same as supply voltage (between control output and +V) - Residual voltage: 3.0 V or less (at 200 mA source current)
ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) / Incorporated
Incorporated
OFF response: 11 ms or less ON response: 70 ms or less
PNP open-collector transistor - Maximum source current: 60 mA - Applied voltage: Same as supply voltage (between auxiliary output and +V) - Residual voltage: 2.5 V or less (at 60 mA source current)
OFF when control outputs are ON, ON when control outputs are OFF
Incorporated
Top beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the topmost beam channel receives light, lights off when the topmost beam channel is interrupted)
Bottom beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the bottommost beam channel receives light, lights off when the bottom most beam channel is interrupted)
Emission control indicator: Orange LED (lights up in orange during emission halt, lights off during normal operation)
Operation indicator: 2-color (Red / Green) LED (lights up in red when control outputs are OFF, lights up in green when control outputs are ON)
Fault indicator: Yellow LED (lights up or blinks if a fault occurs in the safety light curtain)
Top beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the topmost beam channel receives light, lights off when the topmost beam channel is interrupted)
Bottom beam-axis alignment indicator: 2-color (Red / Blue) LED (lights up in blue when control outputs are ON, lights up in red when the bottommost beam channel receives light, lights off when the bottom most beam channel is interrupted)
Stable light indicator : 2-color (Green / Orange) LED (lights up in green when stable light state, lights up in orange when unstable light state, lights off when beam channels are interrupted)
OSSD indicator: 2-color (Red / Green) LED (lights up in red when control outputs are OFF, lights up in green when control outputs are ON)
Fault indicator: Yellow LED (lights up or blinks if a fault occurs in the safety light curtain)
Incorporated
Emission: Vs-2.5 V to Vs (sink current: 5 mA or less) (Note), Emission halt: Open, or 0 to +1.5 V (Note) : Vs is the same value as the voltage of the used power supply to be used.
IP65 (IEC)
-10 to +40 ℃ +14 to +104 ℉ (No dew condensation or icing allowed), Storage: -20 to +55 ℃ -4 to +131 ℉
45 to 85 % RH, Storage: 45 to 85 % RH
Incandescent light: 5,000 lx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and safety light curtain grounding terminal (Note) It shows the specifications of the built-in safety light curtain.
20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and safety light curtain grounding terminal (Note) It shows the specifications of the built-in safety light curtain.
10 to 55 Hz frequency, 0.35 mm 0.014 in double amplitude in X, Y and Z directions for 20 times each
100 m/s2 acceleration (10 G approx.) with pulse width 16 ms in X, Y and Z directions 1,000 times each
2,000 m 6561 ft or less (800 to 1,100 hPa)
Infrared LED (Peak emission wavelength: 850 nm 0.033 mil)