Enable grip switch SG-C1

The SG-C1 Series Enable Grip Switch is a Grip Switch which allows operators in hazardous areas to operate machines safely.

With three grip positions and multiple operating patterns, the SG-C1 Series Enable Grip Switch can be used in many different applications.

Characteristics

Solid Tactile Feedback
Three Switch Positions
Multiple Operating Patterns

Models table for series Enable grip switch SG-C1

Part No.

Datasheet

Contact Configuration: 3 Position Enabling Switch

Contact Configuration: Push Monitor Switch

Contact Configuration: Additional Control Units: Emergency Stop Switch

Contact Configuration: Additional Control Units: Control Unit (A)

Contact Configuration: Additional Control Units: Control Unit (B)

Contact Configuration: Additional Control Units: Indicator (Green) (C)

Rubber Boot Material/Color

Wiring Style

Applicable Standards

Applicable Standards: Standards For Use

Applicable Directives

Operating Condition: Ambient Temperature

Operating Condition: Ambient Humidity

Operating Condition: Pollution Degree S

Operating Condition: Altitude

Impulse Withstand Voltage (Uimp)

Rated Insulation Voltage (Ui)

Thermal Current (Ith)

Rated Operational Voltage (Ue)/Rated Operational Current (Le)

Electric Shock Protection Class

Operating Frequency

B10D

Mechanical Durability

Electrical Durability

Shock Resistance

Free Fall

Vibration Resistance

Protection

Conditional Short-Circuit Current

Short-Circuit Protective Device

Direct Opening Force

Direct Opening Travel

Actuator Strength (Entire Button Is Pushed)

Indicator

Weight (Typ.)

SG-C1-21-EMK

2
contacts

With
(1NC)

With
(2NC)

Momentary pushbutton switch (2c)

Key selector switch (2c)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

IP65

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Green LED
Rated Operating Voltage : DC 24 V ±10 %
Rated current : 15 mA
(Note): As for the type with pilot light, Ue (contact ratings) of all switches is only less than 30 V DC, and connect all switches to SELV (safety extra low voltage) or PELV (protective extra low voltage) circuit.

Approx. 170 g

SG-C1-21

2
contacts

With
(1NC)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

IP66/IP67

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 140 g

SG-C1-21-EMM

2
contacts

With
(1NC)

With
(2NC)

Momentary pushbutton switch (2c)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

IP65

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 165 g

SG-C1-21-MM

2
contacts

With
(1NC)

Without

Momentary pushbutton switch (2c)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 155 g

SG-C1-21-EG

2
contacts

With
(1NC)

With
(2NC)

Without

With

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 155 g

SG-C1-21-E

2
contacts

With
(1NC)

With
(2NC)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 150 g

Models table for series Enable grip switch SG-C1

Part No.

Datasheet

Contact Configuration: 3 Position Enabling Switch

Contact Configuration: Push Monitor Switch

Contact Configuration: Additional Control Units: Emergency Stop Switch

Contact Configuration: Additional Control Units: Control Unit (A)

Contact Configuration: Additional Control Units: Control Unit (B)

Contact Configuration: Additional Control Units: Indicator (Green) (C)

Rubber Boot Material/Color

Wiring Style

Applicable Standards

Applicable Standards: Standards For Use

Applicable Directives

Operating Condition: Ambient Temperature

Operating Condition: Ambient Humidity

Operating Condition: Pollution Degree S

Operating Condition: Altitude

Impulse Withstand Voltage (Uimp)

Rated Insulation Voltage (Ui)

Thermal Current (Ith)

Rated Operational Voltage (Ue)/Rated Operational Current (Le)

Electric Shock Protection Class

Operating Frequency

B10D

Mechanical Durability

Electrical Durability

Shock Resistance

Free Fall

Vibration Resistance

Protection

Conditional Short-Circuit Current

Short-Circuit Protective Device

Direct Opening Force

Direct Opening Travel

Actuator Strength (Entire Button Is Pushed)

Indicator

Weight (Typ.)

SG-C1-21-EMK

2
contacts

With
(1NC)

With
(2NC)

Momentary pushbutton switch (2c)

Key selector switch (2c)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

IP65

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 170 g

SG-C1-21

2
contacts

With
(1NC)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

IP66/IP67

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 140 g

SG-C1-21-EMM

2
contacts

With
(1NC)

With
(2NC)

Momentary pushbutton switch (2c)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

IP65

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 165 g

SG-C1-21-MM

2
contacts

With
(1NC)

Without

Momentary pushbutton switch (2c)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 155 g

SG-C1-21-EG

2
contacts

With
(1NC)

With
(2NC)

Without

With

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 155 g

SG-C1-21-E

2
contacts

With
(1NC)

With
(2NC)

Without

Silicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.

Solder terminal

IEC 60947-5-1, EN 60947-5-1, JIS C 8201-5-1, GS-ET-22, UL 508, CSA C22.2 No.14

ISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO11161, ISO 10218-1 / EN ISO 10218-1, ANSI/RIA/ISO 10218-1, ANSI/RIA R15.06, ANSI B11.19, ISO 13849-1 / EN ISO 13849-1

Machinery directive (2006/42/EC)
Low voltage directive (2006/95/EC)

-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉

45 to 85 % RH

3 (Inside 2)

2,000 m 6,561.68 ft max.

2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)

250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V

3 A (Emergency stop switch : 5 A)

					Ue
					30V	125V	250V
Ie	Grip switch	3 position enabling switch (Terminal No.: NO1-C1, NO2-C2)	AC	Resistive load (AC-12)	-	1A	0.5A
			AC	Inductive load (ACー15)	-	0.7A	0.5A
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-
		Push monitor switch (Terminal No. 31-32)	AC	Resistive load (AC-12)	-	2.5A	1.5A
			AC	Inductive load (ACー15)	-	1.5A	0.75A
			DC	Resistive load (DC-12)	2.5A	1.1A	0.55A
			DC	Inductive load (DC-13)	2.3A	0.55A	0.27A
	Emergency stop switch (Terminal No. 1-2, 1-2)		AC	Resistive load (AC-12)	-	5A	3A
			AC	Inductive load (ACー15)	-	3A	1.5A
			DC	Resistive load (DC-12)	2A	0.4A	0.2A
			DC	Inductive load (DC-13)	1A	0.22A	0.1A
	Momentary pushbutton switch / Key selector switch (Terminal No.C1-NO1, NC1 C2-NO2, NC2 )		AC	Resistive load (AC-12)	-	0.5A	-
			AC	Inductive load (ACー15)	-	0.3A	-
			DC	Resistive load (DC-12)	1A	0.2A	-
			DC	Inductive load (DC-13)	0.7A	0.1A	-

Class II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)

1,200 operations/hour

2,000,000
(ISO 13849-1 Annex C Table C.1)

Position 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.

100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)

Malfunction : 150 m/s², Destruction : 1,000 m/s²

1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)

Malfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in

50 A (250 V)

250 V AC, 10 A Fuse (IEC60127-1)

60 N min. (Push monitor switch)

4.7 mm 0.185 in min. (Push monitor switch)

500 N min. (Grip switch)

Approx. 150 g

Enable grip switch SG-C1

Characteristics

Part Number List