Specification

Specifications table for model SW-111
ItemPerformance characteristics
CE Marking Directive ComplianceEMC Directive, RoHS Directive
Sensing MethodThru-beam type photoelectric sensor (2 beam axes)
Applicable StandardsCSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)
Power Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current Consumption100 mA or less (excluding external connection load)
OutputsSemiconductor Photo-MOS relay output × 3
- Maximum load current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA of load current)
Output: Output Operation Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON
Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF
Output: Short-Circuit ProtectionIncorporated
Response Time100 ms or less when an object is detected
50 ms or less when an object is not detected
Time-Out Function Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)
External Input0 to 1 V or 10 V to +V: Valid (External input indicator lights up)
4 to 6 V or Open: Invalid (External input indicator lights off)
Indicators: Power Indicator Green LED (lights up when the power is ON)
Indicators: Operation Indicator (OPE.) Green LED (lights up when an object is detected)
Indicators: External Input Indicator 1 Green LED (lights up when external input 1 is valid)
Indicators: External Input Indicator 2 Orange LED (lights up when external input 2 is valid)
Indicators: Fault Indicator (Fault)Yellow LED (blinks or lights up when fault occurs)
Environmental Resistance: Degree of ProtectionIP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)
Ambient Humidity30 to 85 % RH, Storage: 30 to 85 % RH
Ambient Temperature-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient IlluminanceIncandescent light: 3,000 Lx or less at the light-receiving face
Environmental Resistance: Voltage Withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Vibration Resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Insulation Resistance20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Shock Resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Removable-Type Terminals: Connector3.5 mm 0.138 in pitch, 2-level socket: 12 pins
Removable-Type Terminals: Terminal Part 3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)
MaterialEnclosure: Polycarbonate, Polyester
O-ring: Silicone rubber
Mounting nut: PBT
Mounting packing: Silicone rubber
Maximum Cable LengthUp to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm2 ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm2 )
Weight (Typ.)Net weight: 150 g approx.
Gross weight: 220 g approx.

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.