FP7

The FP7 Series offers high performance and functionality in a compact design. Advanced features and expandable intelligent units make it an ideal choice for various Industrial Automation applications.

Key Features

Connect Up To 64 Different Expansion Units
Add On Cassettes Expands Functionality (Communication And Analog I/O) Without Increasing Footprint
24V, 5V DC Terminals And A RS232 Communication Port On All CPUs
Built-In Ethernet Port Supports Modbus TCP, MEWTOCOL, And Ethernet/IP Implicit Messaging. Up To 272 Connections Can Be Active Simultaneously
Fieldbus Units Available: Profibus, Profinet, CANOpen, DeviceNet, and EtherCAT Motion Controller
Built-In Webserver With Preset System Webpage
Up To 35 Serial Communication Channels Are Possible
SD Data Logging Capability (Up To 32GB)
HTTP And FTP Client Functions (SSL-Compatible)

Models table for series FP7
Part No.	Memory Capacity: Memory Selection Pattern 1	Memory Capacity: Memory Selection Pattern 2	Memory Capacity: Memory Selection Pattern 3	Memory Capacity: Memory Selection Pattern 4	Memory Capacity: Memory Selection Pattern 5	Programming Method	Method	Program Memory	Operation Speed	External Input (X)	External Output (Y)	Internal Relay (R)	System Relay (SR)	Link Relay (L)	Timer (T)	Counter (C) (C)	Link Data Register (LD)	System Data Register (SD)	Index Register (I0 to IE)	Master Control Relay (MCR)	Number of Labels (LOOP)	Differential Points	Number of Step Ladders	Number of Subroutines	Number of Interrupt Program	SD Memory Card Function	Real Time Clock	Battery Life (Value Applies When No Power Is Supplied At All.)	Safety Function	PLC Link Function	Interface	Transmission Distance	Transmission Speed	Communication Method	Synchronous Method	Transmission Format	Data Transmission Order	:5V	:24V	Communication Interface	Communication Speed	Ber Of Nodes	Total Cable Length	Ber Of Simultaneous Connections	Communication Protocol (Communication Layer)	DNS	DHCP/DHCPV6	FTP Server/Client (SSL Compatible)	HTTP Server/Client (SSL Compatible)	SMTP Client (SSL Compatible)	SNTP	General-Purpose Communication	Dedicated Communication	Ambient Temperature	Ambient Humidity	Breakdown Voltage	Insulation Resistance	Vibration Resistance	Noise Immunity	Shock Resistance	Operating Condition	Rated Voltage Range	Current Consumption	Net Weight
AFP7CPS41E	Program (steps): 234,000 Data register (Note) : 65,536 Number of max. program block (PB): 468 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 221,500 Data register (Note) : 131,072 Number of max. program block (PB): 443 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 196,000 Data register (Note 1): 262,144 Number of max. program block (PB): 392 (Note) The factory default setting is pattern 3. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 144,500 Data register (Note) : 524,288 Number of max. program block (PB): 289 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 51,500 Data register (Note) : 999,424 Number of max. program block (PB): 103 (Note) For data register (DT), data up to 262,144 words can be backed up.	Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns / step	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits / sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS31ES	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS31	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.															0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS41ES	Program (steps): 234,000 Data register (Note) : 65,536 Number of max. program block (PB): 468 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 221,500 Data register (Note) : 131,072 Number of max. program block (PB): 443 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 196,000 Data register (Note 1): 262,144 Number of max. program block (PB): 392 (Note) The factory default setting is pattern 3. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 144,500 Data register (Note) : 524,288 Number of max. program block (PB): 289 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 51,500 Data register (Note) : 999,424 Number of max. program block (PB): 103 (Note) For data register (DT), data up to 262,144 words can be backed up.	Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns / step	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits / sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFPSWC
AFPSMTKEY
AFP7CPS31E	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS31S	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.															0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS21	Program (steps)(Note) : 64,000 Data register (words)(Note) : 131,072 Number of max. program block (PB) : 128 (Note) The factory default setting is pattern 1. (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps)(Note) : 32,000 Data register (words)(Note) : 262,144 Number of max. program block (PB) : 64 (Note1) For data register (DT), data up to 262,144 words can be backed up.				Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 14 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 μs, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program		Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month			Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display																0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MΩ or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	150 mA or less	180 g approx. (with terminal block and end unit)
AFPSWCKEY

Models table for series FP7
Part No.	Memory Capacity: Memory Selection Pattern 1	Memory Capacity: Memory Selection Pattern 2	Memory Capacity: Memory Selection Pattern 3	Memory Capacity: Memory Selection Pattern 4	Memory Capacity: Memory Selection Pattern 5	Programming Method	Method	Program Memory	Operation Speed	External Input (X)	External Output (Y)	Internal Relay (R)	System Relay (SR)	Link Relay (L)	Timer (T)	Counter (C) (C)	Link Data Register (LD)	System Data Register (SD)	Index Register (I0 to IE)	Master Control Relay (MCR)	Number of Labels (LOOP)	Differential Points	Number of Step Ladders	Number of Subroutines	Number of Interrupt Program	SD Memory Card Function	Real Time Clock	Battery Life (Value Applies When No Power Is Supplied At All.)	Safety Function	PLC Link Function	Interface	Transmission Distance	Transmission Speed	Communication Method	Synchronous Method	Transmission Format	Data Transmission Order	:5V	:24V	Communication Interface	Communication Speed	Ber Of Nodes	Total Cable Length	Ber Of Simultaneous Connections	Communication Protocol (Communication Layer)	DNS	DHCP/DHCPV6	FTP Server/Client (SSL Compatible)	HTTP Server/Client (SSL Compatible)	SMTP Client (SSL Compatible)	SNTP	General-Purpose Communication	Dedicated Communication	Ambient Temperature	Ambient Humidity	Breakdown Voltage	Insulation Resistance	Vibration Resistance	Noise Immunity	Shock Resistance	Operating Condition	Rated Voltage Range	Current Consumption	Net Weight
AFP7CPS41E	Program (steps): 234,000 Data register (Note) : 65,536 Number of max. program block (PB): 468 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 221,500 Data register (Note) : 131,072 Number of max. program block (PB): 443 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 196,000 Data register (Note 1): 262,144 Number of max. program block (PB): 392 (Note) The factory default setting is pattern 3. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 144,500 Data register (Note) : 524,288 Number of max. program block (PB): 289 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 51,500 Data register (Note) : 999,424 Number of max. program block (PB): 103 (Note) For data register (DT), data up to 262,144 words can be backed up.	Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns / step	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits / sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS31ES	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS31	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.															0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS41ES	Program (steps): 234,000 Data register (Note) : 65,536 Number of max. program block (PB): 468 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 221,500 Data register (Note) : 131,072 Number of max. program block (PB): 443 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 196,000 Data register (Note 1): 262,144 Number of max. program block (PB): 392 (Note) The factory default setting is pattern 3. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 144,500 Data register (Note) : 524,288 Number of max. program block (PB): 289 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 51,500 Data register (Note) : 999,424 Number of max. program block (PB): 103 (Note) For data register (DT), data up to 262,144 words can be backed up.	Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns / step	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I / O points. When I / O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits / sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFPSWC
AFPSMTKEY
AFP7CPS31E	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.	Ethernet 100BASE-TX / 10BASE-TX	100 Mbps, 10 Mbps auto negotiation function	Max. 254 units	100 m 328 ft (500 m 1,640 ft when a repeater is used)	Max. 220 connections (user connection: 216, system connection: 4)	TCP / IP, UDP	Supports name servers	Automatic IP address acquisition	Server function, file transfer, number of user: 3 Client function, data and file transfer	Server function, system web, Customer web (8 MB), number of concurrent session: 16 Client function, data transfer	Client function, mail transfer	Time adjustment function	16 kB / 1 connection (user connection: 1 to 16)	Slave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note)) (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS31S	Program (steps): 121,500 Data register (Note 1): 131,072 Number of max. program block (PB): 243 (Note) The factory default setting is pattern 1. (Note 1) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 96,000 Data register (Note) : 262,144 Number of max. program block (PB): 192 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 64,000 Data register (Note) : 425,984 Number of max. program block (PB): 128 (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps): 32,000 Data register (Note) : 589,824 Number of max. program block (PB): 64 (Note) For data register (DT), data up to 262,144 words can be backed up.		Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 11 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program	SDHC memory cards of up to 32 GB are usable.	Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month	3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )	Password / Restricted distribution / Read disable setting / Encryption	Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display (Note) 5 V and 24 V DC types are not usable at the same time.	For 24 V DC type GT series Programmable Display (Note 1) 5 V and 24 V DC types are not usable at the same time. (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.															0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MOhm or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	200 mA or less	220 g approx. (with terminal block and end unit)
AFP7CPS21	Program (steps)(Note) : 64,000 Data register (words)(Note) : 131,072 Number of max. program block (PB) : 128 (Note) The factory default setting is pattern 1. (Note) For data register (DT), data up to 262,144 words can be backed up.	Program (steps)(Note) : 32,000 Data register (words)(Note) : 262,144 Number of max. program block (PB) : 64 (Note1) For data register (DT), data up to 262,144 words can be backed up.				Relay symbol method	Cyclic operation method	Built-in flash ROM (no backup battery required)	Basic instruction: min. 14 ns/step	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	8,192 points (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.	32,768 points	Indicate operation status of various relays is shown.	16,384 points	4,096 points: Timer capable of counting (units: 10 μs, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295	1,024 points, Counter capable of counting 1 to 4,294,967,295	16,384 words	Internal operation status of various registers is shown.	15 long words / With switching function	Unlimited	Max. 65,535 points for each program block (PB)	Unlimited	Unlimited	Max. 65,535 points for each program block (PB)	1 periodical interrupt program		Year (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month			Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)	RS-232C, three-wire system, 1 channel (Note) SD, RD and SG terminals are isolated from internal circuits.	15 m 49.213 ft	300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec,	Half-duplex system	Start-stop synchronization system	Stop bit: 1 bit / 2 bits Parity: none / odd / even Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / none / ETX	Transmit from bit 0 in character units.	For 5 V DC type GT series Programmable Display																0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)	500 V AC for 1 minute	100 MΩ or more (at 500 V DC)	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions	1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)	Free from corrosive gasses and excessive dust	20.4 to 28.8 V DC	150 mA or less	180 g approx. (with terminal block and end unit)
AFPSWCKEY

What's New

Stay up to date

View All

FP0H Series Programmable Logic Controllers (PLC)

Industrial Automation Icon

FP7

Part Number List

What's New

Stay up to date

FP0H Series Programmable Logic Controllers (PLC)