Pulse AC Method Area Ionizer ER-X

The ER-X Series Area Ionizers utilize the pulse AC ionization design to achieve high-speed charge removal of wide surface areas for high-volume production lines. In addition to supporting compressed air ionization, the ER-X also features both airless and low-pressure ionization modes for applications where tiny workpieces can be easily blown away. Additional features include automatic ion balance and discharge frequency control (manual control is also possible), flat discharge surface for easy cleaning, discharge needle air barrier design to reduce contamination of the needles, replaceable discharge needle unit for easy maintenance, and a dual head configuration for enhanced charge area and layout (2 different ionizer heads can be connected to a single controller).

Characteristics

Pulse AC method for faster charge removal compared to conventional ionizers
Three charge removal modes for diverse application coverage
Automatic ion balance control
Simplified maintenance of discharge needles
Dual head configuration for enhanced charge removal area and layout expansion

Three charge removal modes for diverse application coverage

The ER-X series offers an Airless Charge Removal mode to eliminate the need for compressed air, a Low-pressure Charge Removal mode for sensitive applications requiring minimal dust dispersion, and a Fast Charge Removal mode that utilizes compressed air to achieve extremely fast charge removal times.

Automatic ion balance control

The ER-X series provides an automatic ion balance control mechanism that senses the amount of ions being generated (which changes according to environmental factors) and compensate for this deviation in the controller, thus maintaining a highly stable ion balance as a default operation setting.

Simplified Maintenance Of Discharge Needles

The ER-X series heads have a flat discharge face, allowing effortless cleaning of the discharge needles and air outlets by simply brushing along the groove provided. The replaceable discharge needle unit (set of 4 needles per unit) further simplifies maintenance.

Dual Head Configuration For Enhanced Charge Removal Area And Layout Expansion

Two different ER-X heads can be combined and connected to a single controller to increase the effective charge removal area.

The new-type controller, ER-XC02, allows simultaneous connection of the bar type head and spot type head.
Charge removal is possible with a layout that places heads on either side of the workpiece.
The charge removal efficiency can be increased by synchronizing the two heads.

Models table for series Pulse AC Method Area Ionizer ER-X
Part No.	CE Marking Compliant Directives	Effective Charge Removal Width	Charge Removal Time	Ion Balance	Discharge Method	Discharge Frequency	Discharge Output Voltage	Maximum Air Pressure	Ozone Generation	Applicable Fluid	Operating Altitude	Ambient Temperature	Ambient Humidity	Vibration Resistance	Shock Resistance	Enclosure Earthing	Material	Weight (Typ.)	Length of High-Voltage Cable	Number of Heads Connected	Supply Voltage	Current Consumption	Indicator	Indicators: Discharge (DSC)	Indicators: Check	Indicators: Error (Error)	Indicator: Level Meter	Output [Alarm, Error, COM(Common)]	Output [Alarm, Error ,COM(Common)]: Output Operation	Output [Alarm, Error ,COM(Common)]: Short-Circuit Protection	Discharge Control Input (DSC OFF)	Voltage Withstandability	Insulation Resistance	Accessories
ER-X064	EMC Directive, RoHS Directive	640 mm 25.197 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note： The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note：The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 780 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)
ER-X064HC	EMC Directive, RoHS Directive	640 mm 25.197 in approx.	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method	30 Hz (Note：Set the discharge frequency to 30 Hz. Do not use any other frequency.)	±7,000 V approx.	0.1 MPa	0.01 ppm or less (Note：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.	35 to 65 % RH, Storage : 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS	Net weight : 900 g approx.	Heat-resistant shielded cable, 1.8 m 5.906 ft															ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)
ER-X008	EMC Directive, RoHS Directive	80 mm 3.150 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz	±7,000 V approx.	0.5 MPa	0.01 ppm or less	Air (dried clean air) (Note：The dried clean air is dried (dew point: equivalent of -20 degrees ) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -10 to +65 degrees +14 to +149 degrees Fahrenheit	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS) Discharge needle: Tungsten	Net weight : 330 g approx.	0.5 m 1.640 ft
ER-X001	EMC Directive, RoHS Directive	50 mm 1.969 in approx.	0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2) (Note 1： Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and air supply 60 ℓ / min. (0.3 MPa)) . (Note 2： Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method (Note：The discharge frequencies of 50 Hz, 20 Hz are accepted.)	50 Hz / 20 Hz	±7,000 V approx.	0.5 MPa	0.01 ppm or less (Note：Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point: equivalent of -20 ℃ -4 ℉) and filtered (mesh-size: equivalent of 0.01 μm) .)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: -10 to +65℃ +14 to +149℉	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS) Discharge needle: PFA, Tungsten	Net weight : 370 g approx.	1.2 m 3.937 ft															Head mounting bracket (installed at the time of factory shipment)
ER-X016	EMC Directive, RoHS Directive	160 mm 6.299 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note： The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note:The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 410 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)
ER-X048	EMC Directive, RoHS Directive	480 mm 18.898 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note： The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note：The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 650 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)
ER-X048HC	EMC Directive, RoHS Directive	480 mm 18.898 in approx.	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method	30 Hz (Note： Set the discharge frequency to 30 Hz. Do not use any other frequency.)	±7,000 V approx.	0.1 MPa	0.01 ppm or less (Note：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.	35 to 65 % RH, Storage : 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS	Net weight : 760 g approx.	Heat-resistant shielded cable, 1.8 m 5.906 ft															ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)
ER-X008HC	EMC Directive, RoHS Directive	80 mm 3.150 in approx.	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method	30 Hz (Note： Set the discharge frequency to 30 Hz. Do not use any other frequency.）	±7,000 V approx.	0.1 MPa	0.01 ppm or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.	35 to 65 % RH, Storage : 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS	Net weight : 420 g approx.	Heat-resistant shielded cable, 1.8 m 5.906 ft															ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)
ER-XC02	EMC Directive, RoHS Directive											0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each	Floating	Enclosure: ABS	Net weight : 130 g approx.		Maximum 2 units	24 V DC ±10 %	450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads	Displays status of Head 1 and 2	Green LED (lights up when discharging)	Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected)	Red LED (lights up when abnormal discharge is detected)	Green LED (5 levels, lights up depending on amount of the charge or ion generation)	PhotoMOS relay output • Maximum load current: 100 mA • Applied voltage: 30 V DC or less (between output-output common) • Residual voltage: 1.5 V or less (at load current of 100 mA)	ALARM: ON when dirt or wear of the discharge needle is detected; OFF when operation is normal. ERROR: OFF when abnormal discharge is detected; ON when operation is normal.	Incorporated (automatic reset type)	Discharge allowed: Open, Discharge halt: 24 V or 0 V shorted	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure	Power supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex]) Ground wire (3.7 m 12.139 ft approx.): 1 pc.
ER-X032	EMC Directive, RoHS Directive	320 mm 12.598 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note:The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 530 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)

Models table for series Pulse AC Method Area Ionizer ER-X
Part No.	CE Marking Compliant Directives	Effective Charge Removal Width	Charge Removal Time	Ion Balance	Discharge Method	Discharge Frequency	Discharge Output Voltage	Maximum Air Pressure	Ozone Generation	Applicable Fluid	Operating Altitude	Ambient Temperature	Ambient Humidity	Vibration Resistance	Shock Resistance	Enclosure Earthing	Material	Weight (Typ.)	Length of High-Voltage Cable	Number of Heads Connected	Supply Voltage	Current Consumption	Indicator	Indicators: Discharge (DSC)	Indicators: Check	Indicators: Error (Error)	Indicator: Level Meter	Output [Alarm, Error, COM(Common)]	Output [Alarm, Error ,COM(Common)]: Output Operation	Output [Alarm, Error ,COM(Common)]: Short-Circuit Protection	Discharge Control Input (DSC OFF)	Voltage Withstandability	Insulation Resistance	Accessories
ER-X064	EMC Directive, RoHS Directive	640 mm 25.197 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note： The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note：The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 780 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)
ER-X064HC	EMC Directive, RoHS Directive	640 mm 25.197 in approx.	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method	30 Hz (Note：Set the discharge frequency to 30 Hz. Do not use any other frequency.)	±7,000 V approx.	0.1 MPa	0.01 ppm or less (Note：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.	35 to 65 % RH, Storage : 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS	Net weight : 900 g approx.	Heat-resistant shielded cable, 1.8 m 5.906 ft															ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)
ER-X008	EMC Directive, RoHS Directive	80 mm 3.150 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz	±7,000 V approx.	0.5 MPa	0.01 ppm or less	Air (dried clean air) (Note：The dried clean air is dried (dew point: equivalent of -20 degrees ) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -10 to +65 degrees +14 to +149 degrees Fahrenheit	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS) Discharge needle: Tungsten	Net weight : 330 g approx.	0.5 m 1.640 ft
ER-X001	EMC Directive, RoHS Directive	50 mm 1.969 in approx.	0.3 sec. or less (Note 1), 0.5 sec. or less (Note 2) (Note 1： Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and air supply 60 ℓ / min. (0.3 MPa)) . (Note 2： Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method (Note：The discharge frequencies of 50 Hz, 20 Hz are accepted.)	50 Hz / 20 Hz	±7,000 V approx.	0.5 MPa	0.01 ppm or less (Note：Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge wavelength 50 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point: equivalent of -20 ℃ -4 ℉) and filtered (mesh-size: equivalent of 0.01 μm) .)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +40 ℃ +32 to +104 ℉ (No dew condensation), Storage: -10 to +65℃ +14 to +149℉	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS) Discharge needle: PFA, Tungsten	Net weight : 370 g approx.	1.2 m 3.937 ft															Head mounting bracket (installed at the time of factory shipment)
ER-X016	EMC Directive, RoHS Directive	160 mm 6.299 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note： The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note:The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 410 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)
ER-X048	EMC Directive, RoHS Directive	480 mm 18.898 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note： The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note：The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 650 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)
ER-X048HC	EMC Directive, RoHS Directive	480 mm 18.898 in approx.	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method	30 Hz (Note： Set the discharge frequency to 30 Hz. Do not use any other frequency.)	±7,000 V approx.	0.1 MPa	0.01 ppm or less (Note：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.	35 to 65 % RH, Storage : 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS	Net weight : 760 g approx.	Heat-resistant shielded cable, 1.8 m 5.906 ft															ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)
ER-X008HC	EMC Directive, RoHS Directive	80 mm 3.150 in approx.	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)	Pulse AC method	30 Hz (Note： Set the discharge frequency to 30 Hz. Do not use any other frequency.）	±7,000 V approx.	0.1 MPa	0.01 ppm or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.	35 to 65 % RH, Storage : 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS	Net weight : 420 g approx.	Heat-resistant shielded cable, 1.8 m 5.906 ft															ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)
ER-XC02	EMC Directive, RoHS Directive											0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each	Floating	Enclosure: ABS	Net weight : 130 g approx.		Maximum 2 units	24 V DC ±10 %	450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads	Displays status of Head 1 and 2	Green LED (lights up when discharging)	Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected)	Red LED (lights up when abnormal discharge is detected)	Green LED (5 levels, lights up depending on amount of the charge or ion generation)	PhotoMOS relay output • Maximum load current: 100 mA • Applied voltage: 30 V DC or less (between output-output common) • Residual voltage: 1.5 V or less (at load current of 100 mA)	ALARM: ON when dirt or wear of the discharge needle is detected; OFF when operation is normal. ERROR: OFF when abnormal discharge is detected; ON when operation is normal.	Incorporated (automatic reset type)	Discharge allowed: Open, Discharge halt: 24 V or 0 V shorted	1,000 V AC for one min. between all supply terminals connected together and enclosure	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure	Power supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex]) Ground wire (3.7 m 12.139 ft approx.): 1 pc.
ER-X032	EMC Directive, RoHS Directive	320 mm 12.598 in approx.	1 second or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.)	plus or minus 30 V or less (Note： In condition of discharge distance 100 mm 3.937 in, center of the product, discharge wavelength 50 Hz and no air supply.) (Note： Ion balance is average of plus and minus. Also, the specification value is typical value in condition of less than plus or minus 10 degrees ambient temperature change, set the ion balance after 30 minutes of the discharge starting, switching on the ion balance control function.)	Pulse AC method	100 Hz / 70 Hz / 50 Hz / 30 Hz / 20 Hz / 10 Hz / 5 Hz / 1 Hz (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)	±7,000 V approx.	0.5 Mpa	0.01 ppm or less	Air (dried clean air) (Note:The dried clean air is dried (dew point: equivalent of -20 ℃) and filtered (mesh-size: equivalent of 0.01 micro m) air.)	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)	0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F	35 to 65 % RH, Storage: 35 to 85 % RH	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each	Floating	Main unit enclosure: PPS, Stainless steal (SUS) Head mounting bracket: Stainless steal (SUS), Discharge needle: Tungsten	Net weight : 530 g approx.	0.5 m 1.640 ft (Note：The high-voltage cable is also available in lengths of 1 m 3.281 ft and 2 m 6.562 ft. The discharge frequency of 1 m 3.281 ft / 2 m 6.562 ft cables is 50 / 30 / 20 / 10 / 5 / 1 Hz. For details, please contact our sales office.)

Pulse AC Method Area Ionizer ER-X

Three charge removal modes for diverse application coverage

Automatic ion balance control

Simplified Maintenance Of Discharge Needles

Dual Head Configuration For Enhanced Charge Removal Area And Layout Expansion

Part Number List