Specification

Specifications table for model ER-X008HC
ItemPerformance characteristics
CE Marking Compliant DirectivesEMC Directive, RoHS Directive
Effective Charge Removal Width80 mm
3.150 in
approx.
Charge Removal Time1 sec. or less
(Note: Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
Ion Balance±30 V or less
(Note 1:Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
(Note 2: Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)
Discharge MethodPulse AC method
Discharge Frequency30 Hz
(Note: Set the discharge frequency to 30 Hz. Do not use any other frequency.)
Discharge Output Voltage±7,000 V approx.
Maximum Air Pressure 0.1 MPa
Ozone Generation0.01 ppm or less
(Note: Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
Applicable FluidAir (dried clean air)
(Note:The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)
Operating Altitude2,000 m 6561.68 ft or less
(Note:Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)
Ambient TemperatureHead : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉
High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉
(Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.
Ambient Humidity35 to 65 % RH, Storage : 35 to 85 % RH
Vibration Resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock Resistance100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure EarthingFloating
MaterialMain unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS),
Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS
Weight (Typ.)Net weight : 420 g approx.
Length of High-Voltage CableHeat-resistant shielded cable, 1.8 m 5.906 ft
Accessoriesø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.