Ultra-compact Ionizer ER-V

The ER-V Ultra-Compact Ionizer offers a new style in charge removal. It uses high frequency AC in an ultra-compact Ionizer for superior static elimination.

Characteristics

Nozzle Variation Allows Charge Remove For A Variety Of Processes: Shower Nozzle, Straight Bar Nozzle, Conductive And Shape-Preserving Tubes
Its Excellent Removal Performance Produces Excellent Ion Balance: +/-15V
The Compact Design Removes Static Charges Of Objects Even In Narrow Spaces
Advanced Functions Developed With Safety And Easy Maintenance In Mind

Ultra-compact Ionizer ER-V

Part number list

Results 1

Models table for series Ultra-compact Ionizer ER-V
Part No.	Datasheet	CE Marking Compliant Directives	Charge Removal Time	Ion Balance	Ozone Generation	Applicable Fluid	Supplied Air Flow	Air Pressure Range	Supply Voltage	Current Consumption	Discharge Method	Discharge Output Voltage	Check Output (CHECK)	Check Output: Output Operation	Check Output: Short-Circuit Protection	Error Output	Error Output: Output Operation	Error Output: Short-Circuit Protection	Discharge Halt Input (DSC OFF)	Reset Input	Indicators: Power	Indicators: Discharge (DSC)	Indicators: Check	Indicators: Error (Error)	Ambient Temperature	Ambient Humidity	Vibration Resistance	Cable	Material	Weight (Typ.)	Accessories
ER-VS02		EMC Directive, RoHS Directive	1 sec. or less (plus or minus1,000 V to plus or minus100 V) (Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa while the shower nozzle is in use. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)	plus or minus10 V or less (Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa while the shower nozzle is in use. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)	0.03 ppm or less (Note) A typical sample applied with a power voltage of 24 V, a distance of 300 mm 11.811 in from the front surface of the air flow outlet and a pressure of 0.25 MPa while the shower nozzle is in use.	Air (dried clean air) (Note) The air is dried (dew point: equivalent of –20 ℃ – 4 ℉) and filtered (mesh-size: equivalent of 0.01 microm 0.0004 mil) air.	500 liter/min. (ANR) or less (Note) The applicable pressure range depends on the nozzle to be used.	0.05 to 0.7 MPa (Note) The applicable pressure range depends on the nozzle to be used.	24 V DC plus or minus10 %	70 mA or less	High frequency AC method	2,000 V approx.	NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between check output and 0 V) • Residual voltage: 1 V or less (at 50 mA sink current)	ON when a dirt or worn etc. of the discharge needle is detected for 1.5 sec. or more continuously, OFF when operation is normal (Note) When confirming the check output, carry out discharge for 2 sec. or more.	Incorporated	NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between error output and 0 V) • Residual voltage: 1 V or less (at 50 mA sink current)	OFF when abnormal discharge is detected, ON when operation is normal	Incorporated	Short-circuit to 0 V: Discharge halt, Open: Discharge allowed (operation start) (Note： ”DSC” is an abbreviated name of ”DISCHARGE”.)	When abnormal discharge is detected, discharge is halted due to an error. Reset the discharge halt by briefly shorting the power supply’s 0 V line.	Green LED (lights up when the power is ON)	Green LED (lights up when discharging) (Note： ”DSC” is an abbreviated name of ”DISCHARGE”.)	Orange LED (lights up when the discharge needle is worn or dirty, etc.) (Note) When confirming the check output, carry out discharge for 2 sec. or more.	Red LED (lights up when abnormal discharge is detected)	0 to +55 ℃ +32 to +131 ℉ (No dew condensation allowed)	35 to 65 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	Cable with a connector, 0.5 m 1.640 ft long	Enclosure: PPS, Cover: Stainless steel, Discharge needle: Tungsten	Net weight: 120 g approx.	Connector for wiring: 1 set [Manufactured by Molex: Housing (5557-08R), Terminal (5556TL)]

Models table for series Ultra-compact Ionizer ER-V
Part No.	Datasheet	CE Marking Compliant Directives	Charge Removal Time	Ion Balance	Ozone Generation	Applicable Fluid	Supplied Air Flow	Air Pressure Range	Supply Voltage	Current Consumption	Discharge Method	Discharge Output Voltage	Check Output (CHECK)	Check Output: Output Operation	Check Output: Short-Circuit Protection	Error Output	Error Output: Output Operation	Error Output: Short-Circuit Protection	Discharge Halt Input (DSC OFF)	Reset Input	Indicators: Power	Indicators: Discharge (DSC)	Indicators: Check	Indicators: Error (Error)	Ambient Temperature	Ambient Humidity	Vibration Resistance	Cable	Material	Weight (Typ.)	Accessories
ER-VS02		EMC Directive, RoHS Directive	1 sec. or less (plus or minus1,000 V to plus or minus100 V) (Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa while the shower nozzle is in use. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)	plus or minus10 V or less (Note) A typical sample applied with a supply voltage of 24 V, a distance of 100 mm 3.937 in from the front surface of the air flow outlet and a pressure of 0.25 MPa while the shower nozzle is in use. (Measured on a sample left in the atmosphere at a relative humidity of 65 % RH or less for 24 hours or more.)	0.03 ppm or less (Note) A typical sample applied with a power voltage of 24 V, a distance of 300 mm 11.811 in from the front surface of the air flow outlet and a pressure of 0.25 MPa while the shower nozzle is in use.	Air (dried clean air) (Note) The air is dried (dew point: equivalent of –20 ℃ – 4 ℉) and filtered (mesh-size: equivalent of 0.01 microm 0.0004 mil) air.	500 liter/min. (ANR) or less (Note) The applicable pressure range depends on the nozzle to be used.	0.05 to 0.7 MPa (Note) The applicable pressure range depends on the nozzle to be used.	24 V DC plus or minus10 %	70 mA or less	High frequency AC method	2,000 V approx.	NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between check output and 0 V) • Residual voltage: 1 V or less (at 50 mA sink current)	ON when a dirt or worn etc. of the discharge needle is detected for 1.5 sec. or more continuously, OFF when operation is normal (Note) When confirming the check output, carry out discharge for 2 sec. or more.	Incorporated	NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between error output and 0 V) • Residual voltage: 1 V or less (at 50 mA sink current)	OFF when abnormal discharge is detected, ON when operation is normal	Incorporated	Short-circuit to 0 V: Discharge halt, Open: Discharge allowed (operation start) (Note： ”DSC” is an abbreviated name of ”DISCHARGE”.)	When abnormal discharge is detected, discharge is halted due to an error. Reset the discharge halt by briefly shorting the power supply’s 0 V line.	Green LED (lights up when the power is ON)	Green LED (lights up when discharging) (Note： ”DSC” is an abbreviated name of ”DISCHARGE”.)	Orange LED (lights up when the discharge needle is worn or dirty, etc.) (Note) When confirming the check output, carry out discharge for 2 sec. or more.	Red LED (lights up when abnormal discharge is detected)	0 to +55 ℃ +32 to +131 ℉ (No dew condensation allowed)	35 to 65 % RH	10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each	Cable with a connector, 0.5 m 1.640 ft long	Enclosure: PPS, Cover: Stainless steel, Discharge needle: Tungsten	Net weight: 120 g approx.	Connector for wiring: 1 set [Manufactured by Molex: Housing (5557-08R), Terminal (5556TL)]