Specification

Specifications table for model ADY12012
ItemPerformance characteristics
Operating Function 2 coil latching
Rated Coil Voltage12 V DC
Contact Arrangement1 Form A
AccessoriesSockets are available.
Protective ConstructionSealed
Terminal TypePC board terminal
Rated Operating Power 200 mW
Max. Switching Voltage250 V AC, 125 V DC (0.2 A)
Max. Switching Current10 A (AC, DC)
Min. Switching Load (Reference Value) 10 mA 5 V DC
Contact MaterialAu-flashed AgSnO2 type
Mechanical LifeMin. 50x106 ope. (switching frequency: at 300 times/min)
Electrical LifeMin. 1x105
Dielectric Strength (Initial): Between Open Contacts1,000 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil4,000 Vrms for 1 min (detection current: 10 mA)
Ambient TemperatureAmbient temperature: –40 to +70°C
Humidity: 5 to 85% R.H.
(Not freezing and condensing at low temperature)
Set Voltage Max. 70% V of rated coil voltage (Initial)
Reset VoltageMax. 70% V of rated coil voltage (Initial)
Insulation Distance[Between input and output]
6 mm
Packing QuantityCarton
Packing Quantity; Inner Carton (Pcs.) 50
Packing Quantity; Outer Carton (Pcs.)500
Rated Operating Current [±10%] (at 20°C)Set coil: 16.6 mA
Reset coil: 16.6 mA
Resistance [±10%] (at 20°C) Set coil: 720 Ω
Reset coil: 720 Ω
Max. Allowable Voltage (at 20°C 68°F)130% V of rated coil voltage
Contact Resistance (Initial)Max. 30 mΩ (by voltage drop 6 V DC 1 A)
Contact Rating (Resistive Load)10 A 250 V AC, 10 A 30 V DC
Insulation Resistance (Initial)Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Surge Withstand Voltage (Initial): Between Contact and Coil10,000 V
Hock Resistance (Functional)98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
Hock Resistance (Destructive)980 m/s2 (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
Vibration Resistance (Destructive)10 to 55 Hz (at double amplitude of 3 mm)
Weight (Typ.)Approx. 6 g
ConditionsAmbient temperature: -40 to +70°C
Humidity: 5 to 85% RH (Avoid icing and condensation)
Resistive Load[switching frequency: 20 times/min]
Min. 100x103 ope. 10 A 250 V AC
Min. 100x103 ope. 10 A 30 V DC
Time (Initial) (at 20°C 68°F) (Initial) Max. 10 ms at rated coil voltage (without bounce)
Reset Time (Initial) (at20°C 68°F) Max. 10 ms at rated coil voltage (without bounce, without diode)
Max. Switching Power (Resistive Load) 2,500 VA, 300 W

Stock Check

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date