ACTE3CR1
Specification
| Item | Performance characteristics |
|---|---|
| Protective Construction | Flux tight |
| Coil Resistance (at 20oC) | 110Ω |
| Heat Resistance of Types | Pin in Paste compliant type |
| Contact Arrangement | 1 Form C x 2 (8 pins) |
| Contact Type | Standard type (Ag alloy / Cu clad) |
| Terminal Type | PC board type |
| Operating Function | Single side stable |
| Rated Coil Voltage | 12V DC |
| Operate (Set) Voltage (at20°C) (Initial) | Max. 5.5V DC |
| Coil Resistance (At 20oC) | 110Ω |
| Rated Operating Power | 1,309 mW |
| Usable Voltage Range | 10 to 16V DC |
| Contact Resistance (Initial) | Max. 50mΩ (N.O. side: typ. 4mΩ, N.C. side: typ. 5mΩ) (By voltage drop 1A 6V DC) |
| Contact Material | Ag alloy |
| Nominal Switching Capacity (Resistive Load) | N.O. side: 20A 14V DC, N.C. side: 10A 14V DC |
| Contact Data: Max. Carrying Current | 25A for 2 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial) |
| Min. Switching Load (Resistive) | 1A 14V DC (at 20°C 68°F) |
| Insulation Resistance (Min. MΩ)(Initial) | Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.) |
| Dielectric Strength (Between Open Contacts) (Initial) | 500 Vrms for 1 min. (Detection current: 10mA) |
| Dielectric Strength (Between Contacts and Coil) (Initial) | 500 Vrms for 1 min. (Detection current: 10mA) |
| Operate (Set) Time<br>(At Rated Coil Voltage) (At 20oC) (Initial) | Max. 10ms (without contact bounce time) |
| Release (Reset) Time<br>(at Rated Coil Voltage) (at 20°C) (Initial) | Max. 10ms (Without contact bounce time) (Without diode) |
| Shock Resistance: Functional | Min. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10µs) |
| Shock Resistance: Destructive | Min. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms) |
| Vibration Resistance: Functional | 10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10µs) |
| Vibration Resistance: Destructive | 10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G], Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours |
| Expected Life: Mechanical Life | Min. 107 (at 120 cpm) |
| Expected Life: Electrical | [Resistive load] Min. 105 at rated switching capacity, Operating frequency: 1s ON, 9s OFF [Motor load] Min. 105 25 A 14V DC at motor lock condition, Operating frequency: 0.5s ON, 9.5s OFF |
| Conditions | Ambient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H. (Please avoid icing or condensation) |
| Weight (Typ.) | Approx. 6.5 g .23 oz |
| Packing Quantity | Tube |
| Inner Carton (Pieces) | 40 |
| Outer Carton (Pieces) | 2,000 |
Stock Check
What's New
Stay up to date
Latest Videos
Playlist
Relays & Contactors
New Product Introduction: DS-P Series
Relays & Contactors Icon