Specification

Specifications table for model ACTH5CR3
ItemPerformance characteristics
Protective ConstructionFlux tight
Terminal TypeSurface-mount terminal type
Coil Resistance (at 20oC)220Ω
Contact Arrangement1 Form C
Contact TypeStandard type (Ag alloy / Cu clad)
Operating Function Single side stable
Rated Coil Voltage12V DC
Operate (Set) Voltage (at20°C) (Initial) Max. 7.7V DC
Release (Reset) voltage (at20°C) (Initial)Min. 0.6V DC
Rated Operating Current [±10%] (at 20°C)54.5 mA
Coil Resistance (At 20oC)220Ω
Rated Operating Power 655 mW
Usable Voltage Range10 to 16V DC
Heat Resistance of TypesReflow type
Contact Resistance (Initial)Max. 50mΩ (N.O. side: typ. 4.5mΩ, N.C. side: typ. 5.5mΩ) (By voltage drop 1A 6V DC)
Contact MaterialAg alloy
Nominal Switching Capacity (Resistive Load) N.O. side: 20A 14V DC, N.C. side: 10A 14V DC
Contact Data: Max. Carrying Current25A for 10 minutes (Coil applied voltage 12V DC, at 20°C 68°F) (initial)
Min. Switching Load (Resistive) 1A 14V DC (at 20°C 68°F)
Insulation Resistance (Min. MΩ)(Initial)Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Dielectric Strength (Between Open Contacts) (Initial)500 Vrms for 1 min. (Detection current: 10mA)
Dielectric Strength (Between Contacts and Coil) (Initial)500 Vrms for 1 min. (Detection current: 10mA)
Operate (Set) Time
(At Rated Coil Voltage) (At 20oC) (Initial)
Max. 10ms (without contact bounce time)
Release (Reset) Time
(at Rated Coil Voltage) (at 20°C) (Initial)
Max. 10ms (Without contact bounce time) (Without diode)
Shock Resistance: Functional Min. 100 m/s2 (Half-wave pulse of sine wave: 11ms; detection time: 10µs)
Shock Resistance: DestructiveMin. 1,000 m/s2 (Half-wave pulse of sine wave: 6ms)
Vibration Resistance: Functional10 to 100 Hz, Min. 44.1 m/s2 (Detection time: 10µs)
Vibration Resistance: Destructive10 to 500 Hz, Min. 44.1 m/s2,
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Expected Life: Mechanical LifeMin. 107 (at 120 cpm)
Expected Life: Electrical[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
ConditionsAmbient temperature: –40 to +110°C –40 to +230°F, Humidity: 2 to 85% R.H.
(Please avoid icing or condensation)
Weight (Typ.)Approx. 3 g .106 oz
Packing QuantityTape and reel
Inner Carton (Pieces)500
Outer Carton (Pieces) 2,000

Stock Check

Stock check for product ACTH5CR3
DistributorQuantityInventory Date
No stock found

Important

The service is owned, operated, controlled and managed by Panasonic's distributors.

For pricing, delivery and technical questions related to this service, please direct to them.

Panasonic assumes no responsibility for any dealings you may have with distributors.

What's New

Stay up to date