| | Flux-resistant | 1 coil latching | With a test button | 12 V DC | 150 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 12.5 mA Reset coil: 12.5 mA | Set coil: 960 Î© Reset coil: 960 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |

| | Sealed | 1 coil latching | Without a test button | 5 V DC | 150 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 29.9 mA Reset coil: 29.9 mA | Set coil: 167 Î© Reset coil: 167 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |

| | Flux-resistant | 1 coil latching | Without a test button | 6 V DC | 150 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 25 mA Reset coil: 25 mA | Set coil: 240 Î© Reset coil: 240 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |

| | Flux-resistant | 1 coil latching | Without a test button | 5 V DC | 150 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 29.9 mA Reset coil: 29.9 mA | Set coil: 167 Î© Reset coil: 167 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |

| | Flux-resistant | Single side stable | Without a test button | 48 V DC | 250 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | | | 5.2 mA | 9,216 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | | | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | Max. 75% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) |

| | Sealed | Single side stable | Without a test button | 5 V DC | 250 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | | | 50 mA | 100 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | | | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | Max. 75% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) |

| | Sealed | Single side stable | Without a test button | 48 V DC | 250 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | | | 5.2 mA | 9,216 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | | | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | Max. 75% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) |

| | Sealed | 2 coil latching | Without a test button | 48 V DC | 250 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 5.2 mA Reset coil: 5.2 mA | Set coil: 9,216 Î© Reset coil: 9,216 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |

| | Flux-resistant | 2 coil latching | Without a test button | 5 V DC | 250 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 50 mA Reset coil: 50 mA | Set coil: 100 Î© Reset coil: 100 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |

| | Flux-resistant | 2 coil latching | Without a test button | 24 V DC | 250 mW | 1 Form C | PC board terminal | [Between contact and coil] Min. 8 mm (Clearance and Creepage) | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Set coil: 10.4 mA Reset coil: 10.4 mA | Set coil: 2,304 Î© Reset coil: 2,304 Î© | 130% V of rated coil voltage | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 250 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 20 ms at rated coil voltage (without bounce) | Max. 20 ms at rated coil voltage (without bounce, without diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 3 mm) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 14 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 16 A 250 V AC | | | | |