| | Flux-resistant | Class E insulation | Not available | 9 V DC | 1 Form C | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 40 mA | 225 Î© | 360 mW | 130% V of Rated coil voltage (at 70Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Flux-resistant | Class E insulation | Not available | 48 V DC | 1 Form C | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 7.5 mA | 6,400 Î© | 360 mW | 130% V of Rated coil voltage (at 70Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class B insulation | EN60335-1 (Conform) | 18 V DC | 1 Form A | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 20 mA | 900 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class E insulation | Not available | 9 V DC | 1 Form A | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 40 mA | 225 Î© | 360 mW | 130% V of Rated coil voltage (at 70Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +70Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class B insulation | EN60335-1 (Conform) | 24 V DC | 1 Form A | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 15 mA | 1,600 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class B insulation | EN60335-1 (Conform) | 6 V DC | 1 Form A | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 60 mA | 100 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class B insulation | EN60335-1 (Conform) | 48 V DC | 1 Form A | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 7.5 mA | 6,400 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Flux-resistant | Class B insulation | EN60335-1 (Conform) | 9 V DC | 1 Form C | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 40 mA | 225 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class F insulation | EN60335-1 (Conform) | 12 V DC | 1 Form C | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 30 mA | 400 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +105Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |

| | Sealed | Class F insulation | EN60335-1 (Conform) | 9 V DC | 1 Form C | Single side stable | PC board terminal | 500 | 100 | Max. 70% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 40 mA | 225 Î© | 360 mW | 130% V of Rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 10 A 250 V AC (N.O.), 10 A 125 V AC, 6 A 277 V AC, 5 A 30 V DC | 2,500 VA 150 W (N.O.), 1,662 VA 150 W (N.C.) | 277 V AC, 100 V DC (0.5A) | 10 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 100 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 750 Vrms for 1 min. (detection current: 10 mA) | 1,500 Vrms for 1 min. (detection current: 10 mA) | Max. 10 ms (at rated coil voltage, without bounce, without diode) | Max. 10 ms (at rated coil voltage, without bounce) | Min. 98 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 2.0 mm) | Min. 1x10^{7} ope. (at 180 times/min.) | Ambient temperature: -40 to +105Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 12 g | Min. 100,000 ope. 10 A 125 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 6 A 277 V AC (at 20Â°C, at 20 times/min.) Min. 100,000 ope. 5 A 30 V DC (at 20Â°C, at 20 times/min.) Min. 50,000 ope. 10 A 250 V AC (at 20Â°C, at 20 times/min.) |