JW Series Relays

Series image for JW Series Relays

JW Series Relays

Part number list

Results 72
Models table for series JW Series Relays
Part No.DatasheetProtective ConstructionContact TypeRated Coil VoltageContact ArrangementOperating Function Terminal TypeRated Operating Power Type Coil Insulation ClassAccessoriesPacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage Contact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive Load
JW1aSN-DC6V-F
Sealed
Standard type (5A)
6 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
88 mA
68 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aFSN-DC9V-F
Sealed
High capacity type (10 A)
9 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
58 mA
155 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
10 A 250 V AC, 10 A 30 V DC
2,500 VA, 300 W
250 V AC, 30 V DC
10 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 10 A 250 V AC
Min. 100x103 ope. 10 A 30 V DC
JW1aFSN-DC48V-F
Sealed
High capacity type (10 A)
48 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
11 mA
4,400 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
10 A 250 V AC, 10 A 30 V DC
2,500 VA, 300 W
250 V AC, 30 V DC
10 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 10 A 250 V AC
Min. 100x103 ope. 10 A 30 V DC
JW1aSN-DC9V-F
Sealed
Standard type (5A)
9 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
58 mA
155 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aSN-DC5V-F
Sealed
Standard type (5A)
5 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
106 mA
47 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aHN-DC24V-F
Flux-resistant
Standard type (5A)
24 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
22 mA
1,100 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 20 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aSN-DC48V-F
Sealed
Standard type (5A)
48 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
11 mA
4,400 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aHN-DC5V-F
Flux-resistant
Standard type (5A)
5 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
106 mA
47 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 20 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aSN-DC12V-F
Sealed
Standard type (5A)
12 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
44 mA
270 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aHN-DC9V-F
Flux-resistant
Standard type (5A)
9 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
58 mA
155 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 20 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
What's New

Stay up to date

View All
HE-A Series General Power Relays
Jun 18, 2024

HE-A Series General Power Relays

Relays & Contactors
LQ Series General Power Relay - High Inrush Type
Jun 18, 2024

LQ Series General Power Relay - High Inrush Type

Relays & Contactors
DS-P Series General Power Relays
Oct 19, 2023

DS-P Series General Power Relays

Relays & Contactors
HE Series Power Relay PV Type 90A Wide Gap
May 31, 2023

HE Series Power Relay PV Type 90A Wide Gap

Relays & Contactors
HE-R Series General Power Relays
Apr 13, 2023

HE-R Series General Power Relays

Relays & Contactors
LD-P Series General Power Relays
Jan 12, 2021

LD-P Series General Power Relays

Relays & Contactors
LQ Series Non-Polarized General Power Relays
Oct 3, 2019

LQ Series Non-Polarized General Power Relays

Relays & Contactors
HE-N Series General Power Relays
Aug 31, 2018

HE-N Series General Power Relays

Relays & Contactors
LZ-N Series General Power Relays
Jun 22, 2018

LZ-N Series General Power Relays

Relays & Contactors
DJ-H Series Power Latching Relays
Oct 31, 2017

DJ-H Series Power Latching Relays

Relays & Contactors
Latest Videos

Playlist

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays

Thumbnail for New Product Introduction: HE-R Series General Power Relays

New Product Introduction: HE-R Series General Power Relays

Thumbnail for New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

Thumbnail for New Product Introduction: DS-P Series

New Product Introduction: DS-P Series

Thumbnail for New Product Information: LQ Series Relays

New Product Information: LQ Series Relays

Thumbnail for New Product Introduction: HE-A Series Relays

New Product Introduction: HE-A Series Relays