| | Min. 1mm | 24 V DC | 10 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 10 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 22.1 mA | 1,087 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA | 277 V AC | 10 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 100,000 ope. 10 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Min. 1mm | 9 V DC | 16 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 16 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 58.8 mA | 153 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 50,000 ope. 16 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Standard | 24 V DC | 16 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 16 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 22.1 mA | 1,087 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 50,000 ope. 16 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Min. 1mm | 12 V DC | 16 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 16 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 44.2 mA | 272 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 50,000 ope. 16 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Min. 1mm | 12 V DC | 10 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 10 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 44.2 mA | 272 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA | 277 V AC | 10 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 100,000 ope. 10 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Min. 1mm | 5 V DC | 10 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 10 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 106.4 mA | 47 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA | 277 V AC | 10 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 100,000 ope. 10 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Standard | 12 V DC | 16 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 16 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 44.2 mA | 272 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 50,000 ope. 16 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Min. 1mm | 24 V DC | 16 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 16 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 22.1 mA | 1,087 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 50,000 ope. 16 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Min. 1mm | 9 V DC | 10 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 10 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 58.8 mA | 153 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 2,770 VA | 277 V AC | 10 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 100,000 ope. 10 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |

| | Standard | 5 V DC | 16 A 277 V AC | Flux-resistant | Single side stable | PC board terminal | 16 A | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 10% V of Rated coil voltage (initial) | 106.4 mA | 47 Ω | 530 mW | 130% V of Rated coil voltage | 1 Form A | Max. 100 mΩ (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 4,432 VA | 277 V AC | 16 A (AC) | 100 mA 5 V DC | Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 15 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | 200 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 µs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: –40 to +70°C, Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.) | Approx. 12 g | Min. 50,000 ope. 16 A 277 V AC (at 20°C, with diode, at 6 times/min., ON : OFF = 1 s : 9 s) |