Part Number List

Results 20
Models table for series LZ-N Relays
Part No.DatasheetCoil Insulation ClassRated Coil VoltageContact ArrangementProtective ConstructionOperating Function Terminal TypeRelay Shape Packing Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage Contact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive Load
Class B insulation
12V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
33.3 mA
360 Ω
400 mW
120% V of Rated coil voltage (at 85°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +85°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
Min. 100,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class F insulation
12V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
33.3 mA
360 Ω
400 mW
120% V of Rated coil voltage (at 105°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +105°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
Min. 100,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class F insulation
18V DC
1 Form C
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
22.2 mA
810 Ω
400 mW
120% V of Rated coil voltage (at 105°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.82 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +105°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
N.O.: Min. 50,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
N.C.: Min. 10,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class F insulation
24V DC
1 Form C
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
16.7 mA
1,440 Ω
400 mW
120% V of Rated coil voltage (at 105°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.82 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +105°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
N.O.: Min. 50,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
N.C.: Min. 10,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class B insulation
5V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
80 mA
63 Ω
400 mW
120% V of Rated coil voltage (at 85°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +85°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
Min. 100,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class F insulation
5V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
80 mA
63 Ω
400 mW
120% V of Rated coil voltage (at 105°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +105°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
Min. 100,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class B insulation
18V DC
1 Form C
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
22.2 mA
810 Ω
400 mW
120% V of Rated coil voltage (at 85°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.82 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +85°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
N.O.: Min. 50,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
N.C.: Min. 10,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class F insulation
9V DC
1 Form C
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
44.4 mA
203 Ω
400 mW
120% V of Rated coil voltage (at 105°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.82 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +105°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
N.O.: Min. 50,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
N.C.: Min. 10,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class B insulation
9V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
44.4 mA
203 Ω
400 mW
120% V of Rated coil voltage (at 85°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +85°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
Min. 100,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
Class B insulation
12V DC
1 Form C
Flux-resistant
Single side stable
PC board terminal
Low profile type
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
33.3 mA
360 Ω
400 mW
120% V of Rated coil voltage (at 85°C)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
16 A 250 V AC
4,000 VA
440 V AC
16 A
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
5,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
Min. 100 m/s2 (half-sine shock pulse: 11 ms;, detection time: 10 µs)
Min. 1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.82 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: –40 to +85°C,
Humidity: 5 to 85% R.H. (Avoid icing when using at temperatures lower than 0°.)
Approx. 11 g
N.O.: Min. 50,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)
N.C.: Min. 10,000 ope. 16 A 250 V AC (at 20°C, at 20 times/min., ON : OFF = 1.5 s : 1.5 s)

What's New

Stay up to date