Panasonic’s PA-N Series Relays achieves a high breakdown voltage of 3,000 V, excellent shock resistance, and low power consumption. The PA-N Series products are suitable to switch a maximum of 5A at 250 V AC and 30 V DC. These slim 1 Form A Relays comply with the new PLC safety standard IEC61010 reinforced insulation. The PA-N Series has been developed to comply with the International Electromechanical Commission (IEC) standards and is certified to the Underwriters Laboratories (UL) Inc.’s standards for programmable logic controllers used to control production facilities at factories.

PLC manufacturers are urgently developing products to meet new safety standards, and highly reliable products compliant with the new standards are being sought for relays that control the output from PLCs. In response to these developments, Panasonic has modified the internal structure of the PA-N Series Relays to improve its breakdown voltage from 2,000 V to 3,000 V to make it compatible with the new standards. The PA-N Series is ideal for use in industrial and office equipment, measuring devices, test equipment applications, and more.  

Features and Benefits

  • Slim Size: 5 mm (W) x 20 mm (D) x 12.5 mm (H) Permits Higher Density Mounting
  • Low Operating Power: 110 mW
  • High Surge Breakdown Voltage: 6,000 V
  • High Breakdown Voltage: 3,000 V
  • IEC61010, ANSI/ISA 12.12.01, RoHS / REACH Compliant
  • UL/C-UL, TUV Approved
Series image for PA-N Series Relays

PA-N Series Relays

Part number list

Results 8
Models table for series PA-N Series Relays
Part No.DatasheetRated Coil VoltageContact ArrangementContact ShapeProtective ConstructionOperating Function Terminal TypeRelay Shape Insulation DistanceAccessoriesPacking QuantityPacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage (at 20°C 68°F)Contact Resistance (Initial)Contact Rating (Resistive Load)Max. Switching Power (Resistive Load) Contact MaterialMax. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)ConditionsMechanical LifeWeight (Typ.)Resistive LoadInductive Load
9 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
12.2 mA
736 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
5 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
22 mA
227 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
24 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
4.6 mA
5,236 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
4.5 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
24.4 mA
184 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
6 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
18.3 mA
327 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
3 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
36.7 mA
82 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
18 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
6.1 mA
2,945 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
12 V DC
1 Form A
Twin
Sealed
Single side stable
PC board terminal
Slim type
[Between contact and coil]
Clearance: Min. 5.29 mm, Creepage: Min. 5.35 mm
Sockets are available.
Tube package
25
1,000
Max. 70% V of rated coil voltage (Initial)
Min. 5% V of rated coil voltage (Initial)
9.2 mA
1,309 Ω
110 mW
120% V of rated coil voltage
Max. 30 mΩ (by voltage drop 6 V DC 1 A)
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
AgNi type + Au
250 V AC, 110 V DC (0.4 A)
5 A (AC, DC)
100 μA 100 mV DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
3,000 Vrms for 1 min (detection current: 10 mA)
6,000 V
Max. 10 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
147 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 2.5 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 3.5 mm)
Ambient temperature: -40 to +90℃ (Allowable temperature is from -40 to +60℃ at our standard packing condition.)
Humidity: 5 to 85% RH (Avoid icing and condensation)
Min. 20x106 ope. (switching frequency: at 180 times/min)
Approx. 3 g
[switching frequency: 20 times/min]
Min. 100x103 ope. 3 A 250 V AC
Min. 100x103 ope. 3 A 30 V DC

[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 50x103 ope. 5 A 250 V AC

[switching frequency: 20 times/min]
Min. 50x103 ope. 5 A 30 V DC
[switching frequency: 6 times/min, ON : OFF = 1 s : 9 s]
Min. 100x103 ope. 2 A 250 V AC (cosΦ = 0.4)
Latest Videos

Playlist

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays

Thumbnail for New Product Introduction: HE-R Series General Power Relays

New Product Introduction: HE-R Series General Power Relays

Thumbnail for New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

New Product Introduction: HE Series Power Relay PV Type 90A Wide Gap

Thumbnail for New Product Introduction: DS-P Series

New Product Introduction: DS-P Series

Thumbnail for New Product Information: LQ Series Relays

New Product Information: LQ Series Relays

Thumbnail for New Product Introduction: HE-A Series Relays

New Product Introduction: HE-A Series Relays