| | Single side stable | 3 V DC | 2 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 80% V of rated coil voltage (Initial) | 78.9 mA | Min. 10% V of rated coil voltage (Initial) | 38 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | | | | |

| | 2 coil latching | 3 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | | Set coil: 75 mA Reset coil: 75 mA | | Set coil: 40 Î© Reset coil: 40 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | | | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce, without diode) |

| | Single side stable | 5 V DC | 2 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 80% V of rated coil voltage (Initial) | 47.6 mA | Min. 10% V of rated coil voltage (Initial) | 105 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | | | | |

| | Single side stable | 3 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 80% V of rated coil voltage (Initial) | 78.9 mA | Min. 10% V of rated coil voltage (Initial) | 38 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | | | | |

| | Single side stable | 48 V DC | 2 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 80% V of rated coil voltage (Initial) | 5.3 mA | Min. 10% V of rated coil voltage (Initial) | 9,000 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | | | | |

| | Single side stable | 9 V DC | 2 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 80% V of rated coil voltage (Initial) | 25 mA | Min. 10% V of rated coil voltage (Initial) | 360 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | | | | |

| | 2 coil latching | 48 V DC | 2 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | | Set coil: 4.7 mA Reset coil: 4.7 mA | | Set coil: 10,200 Î© Reset coil: 10,200 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | | | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce, without diode) |

| | 2 coil latching | 24 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | | Set coil: 10 mA Reset coil: 10 mA | | Set coil: 2,400 Î© Reset coil: 2,400 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | | | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce, without diode) |

| | 2 coil latching | 48 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | | Set coil: 4.7 mA Reset coil: 4.7 mA | | Set coil: 10,200 Î© Reset coil: 10,200 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | | | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | Max. 80% V of rated coil voltage (Initial) | Max. 80% V of rated coil voltage (Initial) | Max. 15 ms at rated coil voltage (without bounce) | Max. 15 ms at rated coil voltage (without bounce, without diode) |

| | Single side stable | 6 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 80% V of rated coil voltage (Initial) | 40 mA | Min. 10% V of rated coil voltage (Initial) | 150 Î© | Approx. 240 mW | 150% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 8 A 250 V AC, 5 A 30 V DC | 2,000 VA, 150 W | 250 V AC, 30 V DC | 8 A (AC), 5 A (DC) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,200 Vrms for 1 min (detection current: 10 mA) | 2,000 Vrms for 1 min (detection current: 10 mA) | 3,750 Vrms for 1 min (detection current: 10 mA) | 6,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 196 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 2 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 10x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +60Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 10 g | [switching frequency ON : OFF = 1 s : 5 s] Min. 100x10^{3} ope. 8 A 250 V AC | | | | |