| | PC board terminal | Standard type | Class B insulation | 5 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 80 mA | 63 Î© | 400 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | Standard type | Class F insulation | 24 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 16.7 mA | 1,440 Î© | 400 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | High sensitive type | Class B insulation | 5 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 40 mA | 125 Î© | 200 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 25 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | High sensitive type | Class F insulation | 12 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 16.7 mA | 720 Î© | 200 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 25 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | High sensitive type | Class F insulation | 6 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 33.3 mA | 180 Î© | 200 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 25 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | High sensitive type | Class B insulation | 18 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 11.1 mA | 1,620 Î© | 200 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 25 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | High sensitive type | Class F insulation | 24 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 8.3 mA | 2,880 Î© | 200 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 25 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | Standard type | Class F insulation | 9 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 44.4 mA | 203 Î© | 400 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | Standard type | Class F insulation | 6 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 66.7 mA | 90 Î© | 400 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 20 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |

| | PC board terminal | High sensitive type | Class B insulation | 12 V DC | Flux-resistant | Single side stable | [Between contact and coil] Clearance: Min. 8 mm, Creepage: Min. 9.5 mm | 100 | 500 | Max. 75% V of Rated coil voltage (initial) | Min. 5% V of Rated coil voltage (initial) | 16.7 mA | 720 Î© | 200 mW | 145% V of Rated coil voltage | 1 Form A | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 277 V AC | 4,432 VA | 277 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (At 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min. (detection current: 10 mA) | 4,000 Vrms for 1 min. (detection current: 10 mA) | 10,000 V | Max. 20 ms (at rated coil voltage, without bounce) | Max. 25 ms (at rated coil voltage, without bounce, with diode) | Min. 200 m/s^{2} (half-sine shock pulse: 11 ms;, detection time: 10 Âµs) | Min. 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 2x10^{6} ope. (at 180 times/min.) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% R.H. (Avoid icing and condensation) | Approx. 15 g |