Part Number List

Results 4
Models table for series LK-T Series Relays
Part No.DatasheetRated Coil VoltageContact ArrangementProtective ConstructionOperating Function Terminal TypePacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage (at 20°C 68°F)Contact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive Load
24 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
10.4 mA
2,304 Ω
250 mW
130% V of Rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 277 V AC, 8 A 277 V AC
2,216 VA
277 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 12 g
Min. 100,000 ope. 5 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
Min. 50,000 ope. 8 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
12 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
20.8 mA
576 Ω
250 mW
130% V of Rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 277 V AC, 8 A 277 V AC
2,216 VA
277 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 12 g
Min. 100,000 ope. 5 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
Min. 50,000 ope. 8 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
9 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
27.8 mA
324 Ω
250 mW
130% V of Rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 277 V AC, 8 A 277 V AC
2,216 VA
277 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 12 g
Min. 100,000 ope. 5 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
Min. 50,000 ope. 8 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
5 V DC
1 Form A
Flux-resistant
Single side stable
PC board terminal
100
500
Max. 70% V of Rated coil voltage (initial)
Min. 10% V of Rated coil voltage (initial)
50.0 mA
100 Ω
250 mW
130% V of Rated coil voltage
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 277 V AC, 8 A 277 V AC
2,216 VA
277 V AC
8 A (AC)
100 mA 5 V DC
Min. 1,000 MΩ (At 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min. (detection current: 10 mA)
4,000 Vrms for 1 min. (detection current: 10 mA)
10,000 V
Max. 15 ms (at rated coil voltage, without bounce)
Max. 5 ms (at rated coil voltage, without bounce, without diode)
200 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 µs)
1,000 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 µs)
10 to 55 Hz (at double amplitude of 1.5 mm)
Min. 1x106 ope. (at 180 times/min.)
Ambient temperature: -40 to +70°C
Humidity: 5 to 85% R.H. (Avoid icing and condensation)
Approx. 12 g
Min. 100,000 ope. 5 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)
Min. 50,000 ope. 8 A 277 V AC (at 20°C, ON : OFF = 1.5 s : 1.5 s)

What's New

Stay up to date