| | Standard type | 24 V DC | 2 Form A 1 Form B | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 78 mA | 306.4 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Form A contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Form A contact: Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) Form B contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | Form A contact: AgSnO_{2} type Form B contact: Au flashed AgNi type | Form A contact: 40 A 277 V AC, 5 A 110 V DC Form B contact: 1 A 277 V AC, 1 A 30 V DC | Form A contact:11,080 VA Form B contact:277 VA, 30 W | Form A contact: 480 V AC, 110 V DC Form B contact: 277 V AC, 30 V DC | Form A contact: 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) Form B contact: 1 A | Form A contact: 100 mA 5 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) Between open Form B contacts: 1,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) Between Form B contact and coil: 2,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 100x10^{3} ope. 20 A 277 V AC Min. 30x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC Form B contact: Min. 100x10^{3} ope. 1 A 277 V AC Min. 100x10^{3} ope. 1 A 30 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Form A contact: Min. 30x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Standard type | 48 V DC | 2 Form A 1 Form B | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 39 mA | 1,225.5 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Form A contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Form A contact: Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) Form B contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | Form A contact: AgSnO_{2} type Form B contact: Au flashed AgNi type | Form A contact: 40 A 277 V AC, 5 A 110 V DC Form B contact: 1 A 277 V AC, 1 A 30 V DC | Form A contact:11,080 VA Form B contact:277 VA, 30 W | Form A contact: 480 V AC, 110 V DC Form B contact: 277 V AC, 30 V DC | Form A contact: 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) Form B contact: 1 A | Form A contact: 100 mA 5 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) Between open Form B contacts: 1,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) Between Form B contact and coil: 2,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 100x10^{3} ope. 20 A 277 V AC Min. 30x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC Form B contact: Min. 100x10^{3} ope. 1 A 277 V AC Min. 100x10^{3} ope. 1 A 30 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Form A contact: Min. 30x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Long life type | 48 V DC | 2 Form A 1 Form B | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 39 mA | 1,225.5 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Form A contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Form A contact: Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) Form B contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | Form A contact: AgSnO_{2} type Form B contact: Au flashed AgNi type | Form A contact: 40 A 277 V AC, 5 A 110 V DC Form B contact: 1 A 277 V AC, 1 A 30 V DC | Form A contact:11,080 VA Form B contact:277 VA, 30 W | Form A contact: 480 V AC, 110 V DC Form B contact: 277 V AC, 30 V DC | Form A contact: 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) Form B contact: 1 A | Form A contact: 100 mA 5 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) Between open Form B contacts: 1,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) Between Form B contact and coil: 2,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 200x10^{3} ope. 20 A 277 V AC Min. 100x10^{3} ope. 30 A 220 V AC Min. 50x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC Form B contact: Min. 100x10^{3} ope. 1 A 277 V AC Form B contact: Min. 100x10^{3} ope. 1 A 30 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Form A contact: Min. 5x10^{4} 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Long life type | 48 V DC | 2 Form A | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 39 mA | 1,225.5 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) | AgSnO_{2} type | 40 A 277 V AC, 5 A 110 V DC | 11,080 VA, 550 W | 480 V AC, 110 V DC | 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Min. 200x10^{3} ope. 20 A 277 V AC Min. 100x10^{3} ope. 30 A 220 V AC Min. 50x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Min. 50x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Long life type | 9 V DC | 2 Form A | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 209 mA | 43.1 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) | AgSnO_{2} type | 40 A 277 V AC, 5 A 110 V DC | 11,080 VA, 550 W | 480 V AC, 110 V DC | 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Min. 200x10^{3} ope. 20 A 277 V AC Min. 100x10^{3} ope. 30 A 220 V AC Min. 50x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Min. 50x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Standard type | 6 V DC | 2 Form A 1 Form B | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 313 mA | 19.1 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Form A contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Form A contact: Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) Form B contact: Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | Form A contact: AgSnO_{2} type Form B contact: Au flashed AgNi type | Form A contact: 40 A 277 V AC, 5 A 110 V DC Form B contact: 1 A 277 V AC, 1 A 30 V DC | Form A contact:11,080 VA Form B contact:277 VA, 30 W | Form A contact: 480 V AC, 110 V DC Form B contact: 277 V AC, 30 V DC | Form A contact: 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) Form B contact: 1 A | Form A contact: 100 mA 5 V DC Form B contact: 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) Between open Form B contacts: 1,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) Between Form B contact and coil: 2,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) 2,500 V (Between Form B contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Form A contact: Min. 100x10^{3} ope. 20 A 277 V AC Min. 30x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC Form B contact: Min. 100x10^{3} ope. 1 A 277 V AC Min. 100x10^{3} ope. 1 A 30 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Form A contact: Min. 30x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Standard type | 6 V DC | 2 Form A | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 313 mA | 19.1 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) | AgSnO_{2} type | 40 A 277 V AC, 5 A 110 V DC | 11,080 VA, 550 W | 480 V AC, 110 V DC | 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Min. 100x10^{3} ope. 20 A 277 V AC Min. 30x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Min. 30x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Standard type | 12 V DC | 2 Form A | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 157 mA | 76.6 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) | AgSnO_{2} type | 40 A 277 V AC, 5 A 110 V DC | 11,080 VA, 550 W | 480 V AC, 110 V DC | 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Min. 100x10^{3} ope. 20 A 277 V AC Min. 30x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Min. 30x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Long life type | 12 V DC | 2 Form A | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 157 mA | 76.6 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) | AgSnO_{2} type | 40 A 277 V AC, 5 A 110 V DC | 11,080 VA, 550 W | 480 V AC, 110 V DC | 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Min. 200x10^{3} ope. 20 A 277 V AC Min. 100x10^{3} ope. 30 A 220 V AC Min. 50x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Min. 50x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |

| | Standard type | 9 V DC | 2 Form A | Flux-resistant | Single side stable | PC board terminal | High capacity type | 25 | 100 | Max. 75% V of rated coil voltage (Initial) | Min. 5% V of rated coil voltage (Initial) | 209 mA | 43.1 Î© | 1,880 mW Holding: 170 mW | (at 55Â°C) 110% V of rated coil voltage 150% V of rated coil voltage (*4) (*4): Total application time: Max. 24 hours | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) Max. 3 mÎ© (by voltage drop 6 V DC 40 A, reference value) | AgSnO_{2} type | 40 A 277 V AC, 5 A 110 V DC | 11,080 VA, 550 W | 480 V AC, 110 V DC | 40 A (Ambient temperature -40 to + 70Â°C) 35 A (Ambient temperature 70 to + 85Â°C) | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | Max. 1,000 A 1 ms, 3 times (Reference value) | Between open Form A contacts: 2,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact sets: 5,000 Vrms for 1min (detection current: 10 mA) | Between Form A contact and coil: 5,000 Vrms for 1min (detection current: 10 mA) | 5,000 Vrms for 1min (detection current: 10 mA) | 10,000 V (Between Form A contact and coil) | 30 to 110% V (at -40 to +55Â°C), 30 to 60% V (at +55 to +85Â°C) | Max. 30 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 5x10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +70Â°C (Max. carrying current 40 A) Ambient temperature: -40 to +85Â°C (Max. carrying current 35 A, transport and storage) Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx.64g | [switching frequency ON : OFF = 1 s : 9 s] Min. 100x10^{3} ope. 20 A 277 V AC Min. 30x10^{3} ope. 35 A 277 V AC Min. 1,000 ope. 40 A 277 V AC Min. 10x10^{3} ope. 5 A 110 V DC | [switching frequency ON : OFF = 0.1 s : 10 s] Min. 30x10^{3} ope. 35 A 250 V AC (cosÏ† = 0.8) | 3.2 mm |