DJ-H Series Relays

Panasonic's DJ-H Series Relays are single-coil or double-coil Latching Relays containing a UL rating for Electronic Ballast Load of 20A @ 277VAC / 347VAC. This is the main switching requirement for lighting controls set by industry-standard NEMA 410. The DJ-H Series Relays are also rated for 50A at 277VAC (or 30A @ 480VAC) nominal resistive switching capacity. Panasonic's DJ-H Series Relays are capable of withstanding ballast loads up to 347VAC required for the Canadian Lighting Market and have a TV-20 inrush rating. A manual switch lever is also available. The nominal operating power for the single-coil latching is 1,000mW and 2-coil latching is 2,000mW contributing to higher energy savings. These Relays are ideal for applications such as lighting control, shutters, and blind controls.

Panasonic's DJ-H Series offers a Latching Relay to meet the requirements of the IoT and Building Automation market for Switching Actuators. The DJ-H Series Power Relay is equipped with a manual lever acting as a test button to allow electric installation service personnel to check circuits. It handles inrush currents created by capacitive load types like fluorescent lamps making it suitable for lighting and motor loads. Due to its cleverly designed internal structure and the excellent contact material, the Relay switches 50A at 277V AC (resistive load) and is certified for fluorescent lamp loads acc. to IEC 60669-1 at 200µF/20A & 250V AC.

Features and Benefits:

High Capacity Power Relay With Manual Switch
20A @ 277 / 347VAC Electronic Ballast Rating (For Canadian Market)
Conforms To NEMA 410 Standard for 347V AC
9.5mm Clearance And 12.7mm Creepage
Maximum Switching Voltage Of 480V AC
5,540 Watt Tungsten Load (TV-20 Rating)
4,000V Isolation Between Contact And Coil
Low Coil Power Consumption
- 100mW (1-Coil Latching)
- 200mW (2-Coil Latching)
Maximum Ambient Operation Temperature At 85^oC
Flux Resistant Construction
Various DC Coil Options: 5V, 12V, and 24V
12kV Surge Breakdown Voltage
High Inrush Capability
- 20A @ 250VAC Capacitive Load (200uF)
Supports Manual Operation
- Manual Switch Type Available
IEC 60669-1 Compliant
UL / C-UL Approved
RoHS/REACH Compliant

DJ-H Series Relays

Part number list

Results 12

Models table for series DJ-H Series Relays
Part No.	Operating Function	Type Classification	Rated Coil Voltage	Protective Construction	Terminal Type	Packing Quantity; Inner Carton (Pcs.)	Packing Quantity; Outer Carton (Pcs.)	Set Voltage	Reset Voltage	Rated Operating Current [±10%] (at 20°C)	Resistance [±10%] (at 20°C)	Rated Operating Power	Max. Allowable Voltage (at 20°C 68°F)	Contact Arrangement	Contact Shape	Contact Resistance (Initial)	Contact Material	Contact Rating (Resistive Load)	Max. Switching Power (Resistive Load)	Max. Switching Voltage	Max. Switching Current	Min. Switching Load (Reference Value)	Insulation Resistance (Initial)	Dielectric Strength (Initial): Between Open Contacts	Dielectric Strength (Initial): Between Contact and Coil	Surge Withstand Voltage (Initial): Between Contact and Coil	Time (Initial) (at 20°C 68°F) (Initial)	Reset Time (Initial) (at20°C 68°F)	Hock Resistance (Functional)	Hock Resistance (Destructive)	Vibration Resistance (Functional)	Vibration Resistance (Destructive)	Mechanical Life	Conditions	Weight (Typ.)	Resistive Load	Inrush Load; Tungsten	Inrush Load; Electronic Ballast	Inrush Load; Capacitive (IEC 60669-1)
ADJH23105	2 coil latching	Manual switch type	5 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 400 mA Reset coil: 400 mA	Set coil: 12.5 Ω Reset coil: 12.5 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH23024	2 coil latching	Standard type (Without manual switch)	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 288 Ω Reset coil: 288 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21105	1 coil latching	Manual switch type	5 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 200 mA Reset coil: 200 mA	Set coil: 25 Ω Reset coil: 25 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21024	1 coil latching	Standard type (Without manual switch)	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 41.7 mA Reset coil: 41.7 mA	Set coil: 576 Ω Reset coil: 576 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21005	1 coil latching	Standard type (Without manual switch)	5 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 200 mA Reset coil: 200 mA	Set coil: 25 Ω Reset coil: 25 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21124	1 coil latching	Manual switch type	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 41.7 mA Reset coil: 41.7 mA	Set coil: 576 Ω Reset coil: 576 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21012	1 coil latching	Standard type (Without manual switch)	12 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 144 Ω Reset coil: 144 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21112	1 coil latching	Manual switch type	12 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 144 Ω Reset coil: 144 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH23124	2 coil latching	Manual switch type	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 288 Ω Reset coil: 288 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH23012	2 coil latching	Standard type (Without manual switch)	12 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 166.7 mA Reset coil: 166.7 mA	Set coil: 72 Ω Reset coil: 72 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF

Models table for series DJ-H Series Relays
Part No.	Operating Function	Type Classification	Rated Coil Voltage	Protective Construction	Terminal Type	Packing Quantity; Inner Carton (Pcs.)	Packing Quantity; Outer Carton (Pcs.)	Set Voltage	Reset Voltage	Rated Operating Current [±10%] (at 20°C)	Resistance [±10%] (at 20°C)	Rated Operating Power	Max. Allowable Voltage (at 20°C 68°F)	Contact Arrangement	Contact Shape	Contact Resistance (Initial)	Contact Material	Contact Rating (Resistive Load)	Max. Switching Power (Resistive Load)	Max. Switching Voltage	Max. Switching Current	Min. Switching Load (Reference Value)	Insulation Resistance (Initial)	Dielectric Strength (Initial): Between Open Contacts	Dielectric Strength (Initial): Between Contact and Coil	Surge Withstand Voltage (Initial): Between Contact and Coil	Time (Initial) (at 20°C 68°F) (Initial)	Reset Time (Initial) (at20°C 68°F)	Hock Resistance (Functional)	Hock Resistance (Destructive)	Vibration Resistance (Functional)	Vibration Resistance (Destructive)	Mechanical Life	Conditions	Weight (Typ.)	Resistive Load	Inrush Load; Tungsten	Inrush Load; Electronic Ballast	Inrush Load; Capacitive (IEC 60669-1)
ADJH23105	2 coil latching	Manual switch type	5 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 400 mA Reset coil: 400 mA	Set coil: 12.5 Ω Reset coil: 12.5 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH23024	2 coil latching	Standard type (Without manual switch)	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 288 Ω Reset coil: 288 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21105	1 coil latching	Manual switch type	5 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 200 mA Reset coil: 200 mA	Set coil: 25 Ω Reset coil: 25 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21024	1 coil latching	Standard type (Without manual switch)	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 41.7 mA Reset coil: 41.7 mA	Set coil: 576 Ω Reset coil: 576 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21005	1 coil latching	Standard type (Without manual switch)	5 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 200 mA Reset coil: 200 mA	Set coil: 25 Ω Reset coil: 25 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21124	1 coil latching	Manual switch type	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 41.7 mA Reset coil: 41.7 mA	Set coil: 576 Ω Reset coil: 576 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21012	1 coil latching	Standard type (Without manual switch)	12 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 144 Ω Reset coil: 144 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH21112	1 coil latching	Manual switch type	12 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 144 Ω Reset coil: 144 Ω	1,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH23124	2 coil latching	Manual switch type	24 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 83.3 mA Reset coil: 83.3 mA	Set coil: 288 Ω Reset coil: 288 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF
ADJH23012	2 coil latching	Standard type (Without manual switch)	12 V DC	Flux-resistant	PC board terminal	50	200	Max. 75% V of rated coil voltage (Initial)	Max. 75% V of rated coil voltage (Initial)	Set coil: 166.7 mA Reset coil: 166.7 mA	Set coil: 72 Ω Reset coil: 72 Ω	2,000 mW	130% V of rated coil voltage	1 Form A	Single	Max. 20 mΩ (by voltage drop 24 V DC 1 A)	AgSnO₂ type	50 A 277 V AC	13,850 VA (50 A 277 V AC)	480 V AC	50 A (AC)	100 mA 5 V DC	Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)	1,500 Vrms for 1 min (detection current: 10 mA)	4,000 Vrms for 1 min (detection current: 10 mA)	12,000 V	Max. 20 ms at rated coil voltage (without bounce)	Max. 20 ms at rated coil voltage (without bounce)	100 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)	1,000 m/s² (half-sine shock pulse: 6 ms)	10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)	10 to 55 Hz (at double amplitude of 2 mm)	Min. 10⁶ ope. (switching frequency: at 180 times/min)	Ambient temperature: -40 to +85℃ (Allowable temperature is from -40 to +70℃ at our standard packing condition.) Humidity: 5 to 85% RH (Avoid icing and condensation)	Approx. 31 g	[switching frequency ON : OFF = 1 s : 9 s] Min. 100x10³ ope. 25 A 277 V AC Min. 10x10³ ope. 50 A 277 V AC	[switching frequency ON : OFF = 1 s : 59 s] Min. 25x10³ ope. 2,400 W 120 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 6ｘ10³ ope. 20 A 277 V AC	[switching frequency ON : OFF = 1 s : 9 s] Min. 30x10³ ope. 20 A 250 V AC 200 μF