| | Single side stable | 24 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 8.3 mA | 2,880 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | | | | |

| | Single side stable | 6 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 33.3 mA | 180 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | | | | |

| | Single side stable | 3 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 66.6 mA | 45 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | | | | |

| | Single side stable | 12 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 16.6 mA | 720 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | | | | |

| | Single side stable | 9 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 22.2 mA | 405 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | | | | |

| | 2 coil latching | 6 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | | | Set coil: 33.3 mA Reset coil: 33.3 mA | Set coil: 180 Î© Reset coil: 180 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | | | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Max. 10 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) |

| | 2 coil latching | 12 V DC | 1 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | | | Set coil: 16.6 mA Reset coil: 16.6 mA | Set coil: 720 Î© Reset coil: 720 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgSnO_{2} type | 10 A 250 V AC, 10 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 10 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | | | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 5 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 10 A 250 V AC Min. 100x10^{3} ope. 10 A 30 V DC | | Max. 70% V of rated coil voltage (Initial) | Max. 70% V of rated coil voltage (Initial) | Max. 10 ms at rated coil voltage (without bounce) | Max. 10 ms at rated coil voltage (without bounce, without diode) |

| | Single side stable | 3 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 66.6 mA | 45 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgNi type | 8 A 250 V AC, 8 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 8 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 6 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC | 4,000 Vrms for 1 min (detection current: 10 mA) | | | | |

| | Single side stable | 9 V DC | 1 Form A 1 Form B | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 22.2 mA | 405 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgNi type | 8 A 250 V AC, 8 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 8 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 6 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC | 4,000 Vrms for 1 min (detection current: 10 mA) | | | | |

| | Single side stable | 3 V DC | 2 Form A | Sealed | PC board terminal | Sockets are available. | 50 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 66.6 mA | 45 Î© | 200 mW | 130% V of rated coil voltage | Single | Max. 30 mÎ© (by voltage drop 6 V DC 1 A) | Au-flashed AgNi type | 8 A 250 V AC, 8 A 30 V DC | 2,500 VA (AC), 300 W (DC) | 250 V AC, 125 V DC (0.2 A) | 8 A (AC, DC) | 10 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 4,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 10 ms at rated coil voltage (without bounce) | Max. 8 ms at rated coil voltage (without bounce, without diode) | 98 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 980 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 3 mm) | Min. 50x10^{6} ope. (switching frequency: at 300 times/min) | Ambient temperature: -40 to +65Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 6 g | [switching frequency: 20 times/min] Min. 100x10^{3} ope. 8 A 250 V AC Min. 100x10^{3} ope. 8 A 30 V DC | 4,000 Vrms for 1 min (detection current: 10 mA) | | | | |