Specifications

Specifications table for model DK1a1b-6V
ItemPerformance characteristics
Operating Function Single side stable
Rated Coil Voltage6 V DC
Contact Arrangement1 Form A 1 Form B
Protective ConstructionSealed
Terminal TypePC board terminal
AccessoriesSockets are available.
Packing Quantity; Inner Carton (Pcs.) 50
Packing Quantity; Outer Carton (Pcs.)500
Operate Voltage (@20oC)Max. 70% V of rated coil voltage (Initial)
Release Voltage (at20°C) Min. 10% V of rated coil voltage (Initial)
Rated Operating Current [±10%] (at 20°C)33.3 mA
Resistance [±10%] (at 20°C) 180 Ω
Rated Operating Power 200 mW
Max. Allowable Voltage (at 20°C 68°F)130% V of rated coil voltage
Contact ShapeSingle
Contact Resistance (Initial)Max. 30 mΩ (by voltage drop 6 V DC 1 A)
Contact MaterialAu-flashed AgNi type
Contact Rating (Resistive Load)8 A 250 V AC, 8 A 30 V DC
Max. Switching Power (Resistive Load) 2,500 VA (AC), 300 W (DC)
Max. Switching Voltage250 V AC, 125 V DC (0.2 A)
Max. Switching Current8 A (AC, DC)
Min. Switching Load (Reference Value) 10 mA 5 V DC
Insulation Resistance (Initial)Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
Dielectric Strength (Initial): Between Open Contacts1,000 Vrms for 1 min (detection current: 10 mA)
Dielectric Strength (Initial): Between Contact and Coil4,000 Vrms for 1 min (detection current: 10 mA)
Surge Withstand Voltage (Initial): Between Contact and Coil10,000 V
Operate Time (Initial) (At 20oC)Max. 10 ms at rated coil voltage (without bounce)
Release Time (Initial) (at 20°C) Max. 8 ms at rated coil voltage (without bounce, without diode)
Hock Resistance (Functional)98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
Hock Resistance (Destructive)980 m/s2 (half-sine shock pulse: 6 ms)
Vibration Resistance (Functional)10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 μs)
Vibration Resistance (Destructive)10 to 55 Hz (at double amplitude of 3 mm)
Mechanical LifeMin. 50x106 ope. (switching frequency: at 300 times/min)
ConditionsAmbient temperature: -40 to +65℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Weight (Typ.)Approx. 6 g
Resistive Load[switching frequency: 20 times/min]
Min. 100x103 ope. 8 A 250 V AC
Min. 100x103 ope. 8 A 30 V DC
Dielectric Strength (Initial): Between Contact Sets4,000 Vrms for 1 min (detection current: 10 mA)

Stock check

Model image for DK1a1b-6V

DK1a1b-6V

Latest Videos

Playlist

Thumbnail for Why Should A Relay Meet The New NEMA 410 Standard? (S1 E1)

Why Should A Relay Meet The New NEMA 410 Standard? (S1 E1)

Thumbnail for Smart Grid Products: LF-G Series Power Relays

Smart Grid Products: LF-G Series Power Relays

Thumbnail for Smart Grid Products: HE-V Series Power Relays

Smart Grid Products: HE-V Series Power Relays

Thumbnail for Features and Benefits of PhotoMOS®

Features and Benefits of PhotoMOS®

Thumbnail for Introduction to PhotoMOS®

Introduction to PhotoMOS®

Thumbnail for Where Technology Meets Humanity

Where Technology Meets Humanity

Thumbnail for Panasonic Industrial Solutions for 5G Networking Applications

Panasonic Industrial Solutions for 5G Networking Applications

Thumbnail for New Product Spotlight: DW Series Relays

New Product Spotlight: DW Series Relays

Thumbnail for New Product Spotlight: PhotoMOS® HE 1 Form A and HE SOP 1 Form A Series Relays

New Product Spotlight: PhotoMOS® HE 1 Form A and HE SOP 1 Form A Series Relays

Thumbnail for New Product Spotlight: PA-N Series General Power Relays

New Product Spotlight: PA-N Series General Power Relays