JW Series Relays

Part Number List

Results 72
Models table for series JW Series Relays
Part No.DatasheetProtective ConstructionContact TypeRated Coil VoltageContact ArrangementOperating Function Terminal TypeRated Operating Power Type Coil Insulation ClassAccessoriesPacking Quantity; Inner Carton (Pcs.) Packing Quantity; Outer Carton (Pcs.)Operate Voltage (@20oC)Release Voltage (at20°C) Rated Operating Current [±10%] (at 20°C)Resistance [±10%] (at 20°C) Rated Operating Power Max. Allowable Voltage Contact ShapeContact Resistance (Initial)Contact MaterialContact Rating (Resistive Load)Max. Switching Power (Resistive Load) Max. Switching VoltageMax. Switching CurrentMin. Switching Load (Reference Value) Insulation Resistance (Initial)Dielectric Strength (Initial): Between Open ContactsDielectric Strength (Initial): Between Contact and CoilSurge Withstand Voltage (Initial): Between Contact and CoilOperate Time (Initial) (At 20oC)Release Time (Initial) (at 20°C) Hock Resistance (Functional)Hock Resistance (Destructive)Vibration Resistance (Functional) Vibration Resistance (Destructive)Mechanical LifeConditionsWeight (Typ.)Resistive Load
JW1aSN-DC6V-F
Sealed
Standard type (5A)
6 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
88 mA
68 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aFSN-DC9V-F
Sealed
High capacity type (10 A)
9 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
58 mA
155 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
10 A 250 V AC, 10 A 30 V DC
2,500 VA, 300 W
250 V AC, 30 V DC
10 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 10 A 250 V AC
Min. 100x103 ope. 10 A 30 V DC
JW1aFSN-DC48V-F
Sealed
High capacity type (10 A)
48 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
11 mA
4,400 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
10 A 250 V AC, 10 A 30 V DC
2,500 VA, 300 W
250 V AC, 30 V DC
10 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 10 A 250 V AC
Min. 100x103 ope. 10 A 30 V DC
JW1aSN-DC9V-F
Sealed
Standard type (5A)
9 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
58 mA
155 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aSN-DC5V-F
Sealed
Standard type (5A)
5 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
106 mA
47 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aFHN-DC9V-F
Flux-resistant
High capacity type (10 A)
9 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
58 mA
155 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
10 A 250 V AC, 10 A 30 V DC
2,500 VA, 300 W
250 V AC, 30 V DC
10 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 20 times/min]
Min. 100x103 ope. 10 A 250 V AC
Min. 100x103 ope. 10 A 30 V DC
JW1aHN-DC24V-F
Flux-resistant
Standard type (5A)
24 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
22 mA
1,100 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 20 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aSN-DC48V-F
Sealed
Standard type (5A)
48 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
11 mA
4,400 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aHN-DC5V-F
Flux-resistant
Standard type (5A)
5 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
106 mA
47 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 20 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC
JW1aSN-DC12V-F
Sealed
Standard type (5A)
12 V DC
1 Form A
Single side stable
PC board terminal
Standard type
Class E insulation
Sockets are available.
100
500
Max. 70% V of rated coil voltage (Initial)
Min. 10% V of rated coil voltage (Initial)
44 mA
270 Ω
530 mW
130% V of rated coil voltage (at 60℃)
Single
Max. 100 mΩ (by voltage drop 6 V DC 1 A)
AgSnO2 type
5 A 250 V AC, 5 A 30 V DC
1,250 VA, 150 W
250 V AC, 30 V DC
5 A
100 mA 5 V DC
Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength.)
1,000 Vrms for 1 min (detection current: 10 mA)
5,000 Vrms for 1 min (detection current: 10 mA)
10,000 V
Max. 15 ms at rated coil voltage (without bounce)
Max. 5 ms at rated coil voltage (without bounce, without diode)
98 m/s2 (half-sine shock pulse: 11 ms, detection time: 10 μs)
980 m/s2 (half-sine shock pulse: 6 ms)
10 to 55 Hz (at double amplitude of 1.6 mm, detection time: 10 μs)
10 to 55 Hz (at double amplitude of 2 mm)
Min. 5x106 ope. (switching frequency: at 180 times/min)
Ambient temperature: -40 to +60℃
Humidity: 5 to 85% RH (Avoid icing and condensation)
Approx. 13 g
[at 20℃, switching frequency: 6 times/min]
Min. 100x103 ope. 5 A 250 V AC
Min. 100x103 ope. 5 A 30 V DC

What's New

Stay up to date

View All
SF Slim Type Series Relays
Relays & Contactors Icon

SF Slim Type Series Relays

HE-A Series General Power Relays
Relays & Contactors Icon

HE-A Series General Power Relays

LQ Series General Power Relay - High Inrush Type
Relays & Contactors Icon

LQ Series General Power Relay - High Inrush Type

DS-P Series General Power Relays
Relays & Contactors Icon

DS-P Series General Power Relays

HE Series Power Relay PV Type 90A Wide Gap
Relays & Contactors Icon

HE Series Power Relay PV Type 90A Wide Gap

HE-R Series General Power Relays
Relays & Contactors Icon

HE-R Series General Power Relays

Select Automotive Relay Parts Are Now Available Through Panasonic Franchised Distributors
Relays & Contactors Icon

Select Automotive Relay Parts Are Now Available Through Panasonic Franchised Distributors

EV-A Series Automotive Relays (DC Contactors)
Relays & Contactors Icon

EV-A Series Automotive Relays (DC Contactors)

SF-M Series Flat Type, 1 Form A 1 Form B Safety Relays
Relays & Contactors Icon

SF-M Series Flat Type, 1 Form A 1 Form B Safety Relays

LQ Series General Power Relays
Relays & Contactors Icon

LQ Series General Power Relays

Latest Videos

Playlist

 
Relays & Contactors

New Product Information: SF Slim Type Series Relays

Relays & Contactors Icon
Sales and SupportFind the nearest sales rep or distributor
White PapersRegister today to access Panasonic's White Paper Pagoda for technical papers and more!
Copyright © 2024 Panasonic Corporation of North America. All Rights Reserved.