| | Class B insulation | 12 V DC | 1 Form C | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 33.3 mA | 360 Î© | 400 mW | 120% V of rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.8 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] N.O.: Min. 50x10^{3} ope. 16 A 250 V AC N.C.: Min. 10x10^{3} ope. 16 A 250 V AC |

| | Class B insulation | 9 V DC | 1 Form C | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 44.4 mA | 203 Î© | 400 mW | 120% V of rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.8 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] N.O.: Min. 50x10^{3} ope. 16 A 250 V AC N.C.: Min. 10x10^{3} ope. 16 A 250 V AC |

| | Class F insulation | 5 V DC | 1 Form C | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 80 mA | 63 Î© | 400 mW | 120% V of rated coil voltage (at 105Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.8 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +105Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] N.O.: Min. 50x10^{3} ope. 16 A 250 V AC N.C.: Min. 10x10^{3} ope. 16 A 250 V AC |

| | Class F insulation | 18 V DC | 1 Form C | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 22.2 mA | 810 Î© | 400 mW | 120% V of rated coil voltage (at 105Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.8 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +105Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] N.O.: Min. 50x10^{3} ope. 16 A 250 V AC N.C.: Min. 10x10^{3} ope. 16 A 250 V AC |

| | Class B insulation | 18 V DC | 1 Form A | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 22.2 mA | 810 Î© | 400 mW | 120% V of rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] Min. 100x10^{3} ope. 16 A 250 V AC |

| | Class F insulation | 9 V DC | 1 Form C | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 44.4 mA | 203 Î© | 400 mW | 120% V of rated coil voltage (at 105Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.8 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +105Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] N.O.: Min. 50x10^{3} ope. 16 A 250 V AC N.C.: Min. 10x10^{3} ope. 16 A 250 V AC |

| | Class B insulation | 5 V DC | 1 Form A | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 80 mA | 63 Î© | 400 mW | 120% V of rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] Min. 100x10^{3} ope. 16 A 250 V AC |

| | Class B insulation | 9 V DC | 1 Form A | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 44.4 mA | 203 Î© | 400 mW | 120% V of rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] Min. 100x10^{3} ope. 16 A 250 V AC |

| | Class B insulation | 24 V DC | 1 Form C | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 16.7 mA | 1,440 Î© | 400 mW | 120% V of rated coil voltage (at 85Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, Only the N.C. contact is 0.8 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +85Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] N.O.: Min. 50x10^{3} ope. 16 A 250 V AC N.C.: Min. 10x10^{3} ope. 16 A 250 V AC |

| | Class F insulation | 12 V DC | 1 Form A | Flux-resistant | Single side stable | PC board terminal | Low profile type | 100 | 500 | Max. 70% V of rated coil voltage (Initial) | Min. 10% V of rated coil voltage (Initial) | 33.3 mA | 360 Î© | 400 mW | 120% V of rated coil voltage (at 105Â°C) | Single | Max. 100 mÎ© (by voltage drop 6 V DC 1 A) | AgSnO_{2} type | 16 A 250 V AC | 4,000 VA | 440 V AC | 16 A | 100 mA 5 V DC | Min. 1,000 MÎ© (at 500 V DC, Measured portion is the same as the case of dielectric strength.) | 1,000 Vrms for 1 min (detection current: 10 mA) | 5,000 Vrms for 1 min (detection current: 10 mA) | 10,000 V | Max. 15 ms at rated coil voltage (without bounce) | Max. 5 ms at rated coil voltage (without bounce, without diode) | 100 m/s^{2} (half-sine shock pulse: 11 ms, detection time: 10 Âµs) | 1,000 m/s^{2} (half-sine shock pulse: 6 ms) | 10 to 55 Hz (at double amplitude of 1.5 mm, detection time: 10 Âµs) | 10 to 55 Hz (at double amplitude of 1.5 mm) | Min. 10^{6} ope. (switching frequency: at 180 times/min) | Ambient temperature: -40 to +105Â°C Humidity: 5 to 85% RH (Avoid icing and condensation) | Approx. 11 g | [at 20Â°C, switching frequency: at 20 times/min (ON : OFF = 1.5 s : 1.5 s)] Min. 100x10^{3} ope. 16 A 250 V AC |